FS Loads of new and used parts NEW PRICES!!!!
- Thread starter jhacking
- Start date
jhacking
Hacker
Re: FS Loads of new and used parts NEW PRICES!!!!
http://www.summitracing.com/parts/PWM-48203/
Just in case you haven't checked to see how much they are.Click the link above. Now you tell me if your offer sounds fair? I'm already giving a great deal on it. It was used for about 1 month.
http://www.summitracing.com/parts/PWM-48203/
Just in case you haven't checked to see how much they are.Click the link above. Now you tell me if your offer sounds fair? I'm already giving a great deal on it. It was used for about 1 month.
akwilks
Mr. Keith
Re: FS Loads of new and used parts NEW PRICES!!!!
Agreed....dibs. Will purchase tomorrow....
Agreed....dibs. Will purchase tomorrow....
Ry368
one mile = 5280 feet
Re: FS Loads of new and used parts NEW PRICES!!!!
Cool brother......you said make an offer. What core was used for this a2a?
cloneman315
Active member
Re: FS Loads of new and used parts NEW PRICES!!!!
I Will give you some info,that fmic is one of the nicest out there,Bolts right in and works very very good,this is the same one I have in my truck! Think it was like 1500 new
I Will give you some info,that fmic is one of the nicest out there,Bolts right in and works very very good,this is the same one I have in my truck! Think it was like 1500 new
Ry368
one mile = 5280 feet
Re: FS Loads of new and used parts NEW PRICES!!!!
I had a dequik a2a on my old Ty that wasn't too bad.......I heard mccoy used Tony Dequick to build his a2a's back in the day, but not sure if that's true or not. Was just curious since Jamie brought up the core value on what type of core was used by Mccoy on this set up?
cloneman315
Active member
Re: FS Loads of new and used parts NEW PRICES!!!!
not sure on who made it,but I know it works well
not sure on who made it,but I know it works well
jhacking
Hacker
Re: FS Loads of new and used parts NEW PRICES!!!!
akwilks add $15 for shipping, let me know when you send the money
Ry368 this is not one of Dquicks cores. I bought this from Jerry in 2008, it looks like a Spearco core to me. I dont know for sure what Jerry used, but thats what it looks like.
akwilks add $15 for shipping, let me know when you send the money
Ry368 this is not one of Dquicks cores. I bought this from Jerry in 2008, it looks like a Spearco core to me. I dont know for sure what Jerry used, but thats what it looks like.
vettandtyphoon
New member
Re: FS Loads of new and used parts NEW PRICES!!!!
i am interested in those heads. what do else do i need for them to fit?, i have a edelbrock carb style intake already from rpm. with a throttle body.
are those an aluminum head? and do they flow better than stock?
i am interested in those heads. what do else do i need for them to fit?, i have a edelbrock carb style intake already from rpm. with a throttle body.
are those an aluminum head? and do they flow better than stock?
jhacking
Hacker
Re: FS Loads of new and used parts NEW PRICES!!!!
These heads are 18* heads so I dont think your Edelbrock manifold from Mike Lee is gonna work. You will have to have a Intake for these to work ,a stock manifold wont. Yes these are Aluminum . Lee is correct a garden hose is better than stock. .
Thanks jamie
These heads are 18* heads so I dont think your Edelbrock manifold from Mike Lee is gonna work. You will have to have a Intake for these to work ,a stock manifold wont. Yes these are Aluminum . Lee is correct a garden hose is better than stock. .
Thanks jamie
Last edited:
turrrbo6
Member
Re: FS Loads of new and used parts NEW PRICES!!!!
a stopped up garden hose flows better than stock heads
a stopped up garden hose flows better than stock heads
Ry368
one mile = 5280 feet
:tup:
akwilks
Mr. Keith
Re: FS Loads of new and used parts NEW PRICES!!!!
Wow, forgot to tell you. money sent for the alternator....
Wow, forgot to tell you. money sent for the alternator....
jhacking
Hacker
Re: FS Loads of new and used parts NEW PRICES!!!!
Udated list. Thanks to evryone else that has bought.
New 3in intercooler piping with bead rolled ends $10 each
New 3in silcone $15 each
New 3in T-bolt $3.00 each
New 1'3/4 T-bolt $3.00 each
Used Mcoy A/A Intercooler with a couple bent tubes from over tighen clamps $750
New Stainless Delete pipe from DP Back $100(SOLD) SY#2661
Used 18* Bowtie 359 heads with springs and valves where $1000 Now $900 ( I have flow charts to go with them)
New Fully Ported By RPM, EFI convertion Kit with AccuFab 75mm TB $700 (SOLD)
New RC 75lbs injectors where $300 Now $250
Used Dephi 50lbs injectors $220
New Precision 120lbs injectors. where $300 Now $250
Used Delphi 75lbs injectors where $250 Now$200
Used Delphi 96lbs injectors where $250 (SOLD)
New 16' Perma cool Fan was $70 Now $40
Used powermaster 200 amp 48203. Was $275 now $220 (SOLD|)
New Wheel spacers. where $175 Now $120
New TCI TH400 Billet Converter (3500 Stall) Was $375 now $310
Used Mezeire WP136S Intercoller Pump $110
Used PT1000 A/W Intercooler was $800 Now $750
Used FAST AFR Digital Controller was $275 Now $220
Used Motes controller. $100 (SOLD) -MRKING
Used MSD 6A $70 (SOLD) -BoostedSUV
Used Crane Hi6 $70 (SOLD)-Robert Lone
Everthing is + Shipping
My PP account is jhacking92@aol.com
Udated list. Thanks to evryone else that has bought.
New 3in intercooler piping with bead rolled ends $10 each
New 3in silcone $15 each
New 3in T-bolt $3.00 each
New 1'3/4 T-bolt $3.00 each
Used Mcoy A/A Intercooler with a couple bent tubes from over tighen clamps $750
New Stainless Delete pipe from DP Back $100(SOLD) SY#2661
Used 18* Bowtie 359 heads with springs and valves where $1000 Now $900 ( I have flow charts to go with them)
New Fully Ported By RPM, EFI convertion Kit with AccuFab 75mm TB $700 (SOLD)
New RC 75lbs injectors where $300 Now $250
Used Dephi 50lbs injectors $220
New Precision 120lbs injectors. where $300 Now $250
Used Delphi 75lbs injectors where $250 Now$200
Used Delphi 96lbs injectors where $250 (SOLD)
New 16' Perma cool Fan was $70 Now $40
Used powermaster 200 amp 48203. Was $275 now $220 (SOLD|)
New Wheel spacers. where $175 Now $120
New TCI TH400 Billet Converter (3500 Stall) Was $375 now $310
Used Mezeire WP136S Intercoller Pump $110
Used PT1000 A/W Intercooler was $800 Now $750
Used FAST AFR Digital Controller was $275 Now $220
Used Motes controller. $100 (SOLD) -MRKING
Used MSD 6A $70 (SOLD) -BoostedSUV
Used Crane Hi6 $70 (SOLD)-Robert Lone
Everthing is + Shipping
My PP account is jhacking92@aol.com
