Recent content by 93BlackTyphoon

Re: ARP L35 rocker studs Thanks guys.

I don't know how, but I snapped a stock rocker stud. Does anyone happen to know the ARP number for L35 rocker studs?

Re: Turbotweak help Truck is between 15 and 20 in park, between 10 and 15 in hear on vacuum

Re: Turbotweak help I'll try the #4 setting eric. Also all sensors are withing the parameters you suggest now. IAC is finally normal. It's a stock wastegate with stock boost solenoid currently.

Re: Turbotweak help Truck ran fine before I upped the injector size. Ran good on Code 59 too until something happened. Well here's an update. I found a big exhaust leak, and I changed the plugs which had been gapped wrong. No, the truck cruises wonderfully with the AFRs bouncing between 13 and...

Re: Turbotweak help Update: The IAC was bad, the truck is actually a bit lean at idle now, lol. Need to tweak the idle screw adjustment a bit more. Found a big exhaust leak too at the crossover pipe, unrelated but it my explain why the truck only makes 3 lbs of boost. Thanks for your help guys...

Re: Turbotweak help Eric has been a great help, but I will give a rundown of what I've told him. The truck is getting way too much fuel, its idling at 10.4 on the wideband, cruise is also very rich, and the idle is choppy, sometimes surges. The fuel pressure, TPS, and MAP are within the...

Re: Turbotweak help Thanks man, this is helpful, just because a part is new, doesnt mean its good. The MAP on my scanmaster is with in spec though.

Re: Turbotweak help I've been messing with the set screw. It's touching the throttle blade then one extra turn. If I adjust it anymore it idles really high.

So I got the VeloSyTy chip, after some issues with Code 59. So now I have the chip, and it seemed to work at first. The chip requires certain parameters to be in spec. I've gotten all but on. The IAC is supposed to be 25-30, mine is at 72 and above. The truck idles rich and cruises rich. The...

Re: Homecoming 2014 Head Count I'll be there with my 93

On the ECU harness, there is a white wire with a single blade connector, mine is missing the male end in the harness, does anyone know what this wire is for? Also, what could it affect if it is unplugged?

Re: bunch of left over goodies Dibs brake adapters and clocking bracket.

Re: More goodies, SRP pistons/rings, 4l80e adapter flange, Crane Gold RR Dibs on the rocker arms.

Re: FS: stainless steel motor mounts (frame pads) Payment sent.