Search results

Has the price come down anymore on the MSD box?

I shared a bunch of pictures on the facebook post. I have tons of Syclone's both hot wheels and Johnny lightning, that includes errors, WL's etc

Please share what number syclone it is for the registry!

I may have one laying around, I'll try and remember to look when I get home tonight

I may have one at home, I'll try and remember to look

The safety neutral switch is inside the center console in front of the shifter. You could also check grounds, or try hitting the starter with something when someone tries cranking it and that will diagnose the starter issue.

I think you'd be going through a lot of nitrous for the same power, sounds like a waste

I had luck with the guy at transfercase.com but I'm not sure they are rebuilt

Hard to say without pictures, but if it is a really clean stock truck high 20's maybe 30k wouldn't be crazy

High pressure, not high volume

What number sy is it, I'll look at what all I have to see if I tracked where it went

Looks awesome!

https://www.amazon.com/Kinugawa-Turbo-Water-Banjo-Mitsubishi/dp/B071DPWCXQ It may be these, the stock turbo is a td06-17c I believe

The common swap is a c4 zr1 wheel which is a 9.5" wide front with a 275-40-17 tire. I believe this rubs a little at full lock but have had no issues running them on my truck

It really depends on the MAP and chip you're running

Make sure you upgrade your bulkhead wiring at the same time or you will have issues with running the bigger pump

I've got a borgeson steering box and it's been pretty nice. I would highly recommend the rear sway bar and changing the steering shaft. I also autocross mine a lot and put a bunch of miles on it, it really depends on your goals. With such a low mileage truck if you don't intend to drive it...

I've got the Steve Morris cam and it's been good. The comp 422 is a whole lot cheaper. An old ty owner used to work for him and did some good testing on his truck when making it.

Don't do it!!!!!!!! Unless you have aftermarket heads, like Brodix, bowtie or Pontiac it's really not worth it. Also there is nobody making headers for these right now, you can only buy used. I bought a used set for my truck to run with Brodix heads and they have been such a pain in the ass...

Have you tried The Driveshaft Shop in North Carolina?