4l80e what year?

[RenegadePete379]

well i had been tryingto do alot of searching but no luck on what year is the good 80e to get that doent any internal modifications to run the trans controller?

is it 05' and up? and it has to be out of 4x4 truck correct?

can i use the stock output from the 80e to go into the ty transfer case? and will it bolt up directly or will it need an adapter plate?

 

[ty166]

Re: 4l80e what year?

try here,

http://www.syty.net/forums/showthread.php?t=56585&highlight=year+80e

here is another

http://www.syty.net/forums/showthread.php?t=66903&highlight=4L80e+install

 

[RenegadePete379]

Re: 4l80e what year?

thanks i found the info i needed

 

[bigblaze]

Re: 4l80e what year?

thanks for info

 

[MRKING]

Re: 4l80e what year?

I didn't write the tag at the bottom , but I sure did laugh when I read it . Lol

Any year 4l80-e will work with a transmission controller since The "e" at the end of 4l80 stands for electronic . I advise anyone who doesn't quite grasp the full concept of the swap details , go cheap at first and use a stock gm 80e controller from the donor vehicle . They are usually $100 or less , vs the almost 1k for the aftermarket .

If this route is taken , one can at least read codes etc from the tcu if something is not hooked up or installed correctly . Once you get a better feel of how it feels/drives stock, then worry about how a more custom shiftpoint drivestyle would compliment your engines needs .