Removing Gage Cluster (searched)

[turbo_tuna]

Hi All,

I am replacing a few lights for the gage cluster. I have removed all the screws from the bottom panel, but the dash panel will not come off as it is attached to the top panel somehow. Are they just clips or are there screws somewhere? I do not want to force anything off.

Regards,
WS

 

[TNPhoon]

Re: Removing Gage Cluster (searched)

Behind the HVAC controls and the section on the other side that has the foglight switches, there are screws behind there. You will need a long screwdriver in order to get to them, and make sure it has a magnetic tip so that you don't lose the screws down into NeverNeverLand.

HVAC controls will kind of be a bitch to pull out, because there's going to be a round wire and clip connected to them on the left hand side.

 

[TNPhoon]

Re: Removing Gage Cluster (searched)

Here you go: https://howtune.com/articles/14-installing-custom-gauge-faces-on-a-gmc-syclone
hth

 

[turbo_tuna]

Re: Removing Gage Cluster (searched)

Excellent! Thank you very much.