Upper intercooler needed

atkonkler

Is this your bush?
I ended up getting a new one made from Radiator Technologies in FL. It's 1/3 bigger and the filler neck is Now the same size of a Radiator filler neck to make things easier when filling and finding another cap if needed.
 

#2021

Donating Member
Look at that.
 

Attachments

  • 82195554_1783649305102878_7599000841273475072_n.jpg
    82195554_1783649305102878_7599000841273475072_n.jpg
    74.8 KB · Views: 56
  • 82207399_1783649491769526_8103603848662220800_n.jpg
    82207399_1783649491769526_8103603848662220800_n.jpg
    88.6 KB · Views: 56
  • 82558088_1783649405102868_4480078067175260160_n.jpg
    82558088_1783649405102868_4480078067175260160_n.jpg
    61.4 KB · Views: 53
  • 83454474_1783649541769521_216747513162498048_n.jpg
    83454474_1783649541769521_216747513162498048_n.jpg
    70.1 KB · Views: 54

atkonkler

Is this your bush?
Winner ...winner chicken dinner it has arrived! It weighs very minimal...excellent work...absolutely gorgeous 😍.
 

Attachments

  • 20221007_150854.jpg
    20221007_150854.jpg
    853 KB · Views: 17
  • 20221007_150909.jpg
    20221007_150909.jpg
    936.7 KB · Views: 18
  • 20221007_150916.jpg
    20221007_150916.jpg
    929.8 KB · Views: 16

gmemony2

Active member
Looks good. Really interested to see if there is any noticeable different over the stock one. Or if there is any real way to check that without the old one currently in there to run temps or anything.
 

atkonkler

Is this your bush?
Looks good. Really interested to see if there is any noticeable different over the stock one. Or if there is any real way to check that without the old one currently in there to run temps or anything.
Old one was leaking* no way to test. Now has become wall Art/ paper weight. I could only give data on new one after install. It truly is a work of Art. Thanks again Radiator Technologies!
 
Looking forward to post-install photos (if you do not mind). It looks like the new unit might be a bit shorter vertically and that the TB flange has moved forward a bit compared to the stock unit. Both of which I would have asked for to achieve more clearance around the AC.

Did they also make/source the oval TB flange?
 

gmemony2

Active member
I spoke to them about it briefly. Asked for specs compared to the original, but he did not have the new one anymore and only had the original so couldn't get side by side pics. Supposedly, about 30% more efficient due to a different core, but I have no idea considering there are no real world tests done on it compared to stock. He said the core was a newer design for what that's worth. I also asked about adding AN fittings instead of the standard for coolant in/out.
 
Top