DaveP

Well a few updates for my questions. The sgt trans is finally fixed I believe 100%. Doofus that redid the trans put all wrong parts in. Servo wrong accummulators (sp) wrong governor wrong. All of that fixed with correct parts and finally shift rpm's correct, firmness on shift's correct gotta say I'm stoked!

Now for the TY checked everything with all the test you gave me. Pointed to servo or converter clutch changed servo no go. So clutch seems to be the culprit! bummer

My Ty is bone stock and like it that way.No mods or after market parts.

Hey Dave this Dewayne I meet u at bobs burgers I was wondering if u have time to check my Ty out LMK thanks

Dave do you have any tips/tricks for sealing the pan on a transmission good to avoid any leaks?

I R&R'd the transmission on one of my Sy's the other day and now it's dripping. New seal, torqued bolts to spec. I seem to have trouble with transmission pans on everything I touch, they always seem to drip afterwards.

Any help would be appreciated.

Roy

Dave checkout my Tys upper radiator trans line compared to Jasons.

My Ty's


Jasons Sy



My Tys must be a replacement? Check it out, it has an adapter before it to.

It gives room to eliminate that bump in the crossover, but if everyone has that angled one (the one on Jasons) then a replacement crossover should have the bump. What do you think?

Hey look at the bottom of this thread http://www.syty.net/forums/showthread.php?p=891022

You'll get a kick out of this. Remember that 93 Ty BPMV I got?

Got it!

Saw you're on. I'm updating part #'s on my site, after I'll upload some pics we took. Just have to organize them first.

Dave, tested the sensors from the 8pin. Multimeter at 2K. It gives 1.8 something on the lt brn > drk grn and nothing on the yel > lt blu. I unplugged the sensor from under the left tire flap deal and tested directly at the sensor plug and still nothing. I thought we tested it didn't we?

Dave, codes are
62
61
63
14
25

then it starts over w 62. With the AutoXray it shows "No Trouble Codes" so apparently nothing was captured in memory.