Spindle Seal?

[Mikel2000]

I bought new hubs from Napa forgetting to also buy the seal that goes in the spindle, so I went down to Autozone and they said there is no seal that goes on the spindle with the new hub, is this true?

 

[WyoSyclone]

Re: Spindle Seal?

There was no extra seal when I replaced mine. What made you think there was a seal??

 

[nello]

Re: Spindle Seal?

The only seal I remember changing when replacing my front hub was #48, it was toast. It's not part of the hub though. Don't recall any other seal, the hub is just one piece and ready to bolt on.

 

[Mikel2000]

Re: Spindle Seal?

it was probably #48,it went on the inside on the spindle,i had to hammer it to get it out, does anyone know the part number

 

[Don W.]

Re: Spindle Seal?

Make sure they give you the 4WD version of that seal.

 

[Poconojoe]

Re: Spindle Seal?

Yes, there is a seal in the inner hub. The lip rides on the half-shaft surface.

GM P/N 560680 Yes, only 6 digits. A parts store such as parts+ or NAPA should be able to cross that number for you.

NAPA lists that number as NOS 2196 and calls it a steering knuckle seal

 

[Mikel2000]

Re: Spindle Seal?

Cool thanks

 

[Mikel2000]

Re: Spindle Seal?

Actually the Napa part # is NOS 21961 went and picked two of them up today $11.99 ea

 

[Quickstop [UK]]

Re: Spindle Seal?

ffs - just installed this crap and no seal in the box - why can this crap not be installed at the same time? F'in sales :bs:

Thanks for fiding this; wish I found it 3 months ago

Cheers