ATR 40# chip with Ultimate?

[TYTILIDIE]

Can I do this? The Ultimate I have was meant for stock injectors. I bought the ATR 40# chip yesturday with 40# Injectors for pretty cheap. I noticed the ATR chip looked like a sotck one and figured if it was meant for 40's then MAYBE, it would work with hte Ultimate. Sorry if this is a stupid question.

 

[NecroWolf]

Re: ATR 40# chip with Ultimate?

i don't see why not, i think all you use the chip for w/ the ultimate is the knock control portion

 

[TYTILIDIE]

Re: ATR 40# chip with Ultimate?

Well, I just tried it and it works fine. o2's are now fluctuatiing instead of bveing low. Have a bit to go but think I am making progress.

 

[turbodig]

Re: ATR 40# chip with Ultimate?

Can I do this? The Ultimate I have was meant for stock injectors. I bought the ATR 40# chip yesturday with 40# Injectors for pretty cheap. I noticed the ATR chip looked like a sotck one and figured if it was meant for 40's then MAYBE, it would work with hte Ultimate. Sorry if this is a stupid question.

It'll operate the same way as a stock one would... ATR just reprogrammed stock memcals.

 

[TYTILIDIE]

Re: ATR 40# chip with Ultimate?

It'll operate the same way as a stock one would... ATR just reprogrammed stock memcals.

So are you saying that even though this ATR chip is supposed to work with 40's that it will not be this way when using the Ultimate with it?

 

[NecroWolf]

Re: ATR 40# chip with Ultimate?

the ultimate chip bypasses that part of the chip, there's two parts on the chip the memcal w/ the tune for the engine and the knock controls

 

[turbodig]

Re: ATR 40# chip with Ultimate?

So are you saying that even though this ATR chip is supposed to work with 40's that it will not be this way when using the Ultimate with it?

Precisely. The only thing you'll be using off the ATR is the ESC module and the calpak resistors. The operating code for the ECM will come from the ultimate.