Looks like I've got myself started again.

live1053rulz

Nor Cal SyTy
I got pissed that my truck is still slow and that I haven't made decisions on what to do yet, so I decided to start tearing the turbo/downpipe off. Worked on that most of today. I'm stuck on the upper two of the four bolts that attach to the exhaust manifold. I've done searches and tried that stuff, but can't figure out how to get those suckers (and the lower oil/water lines) off. I guess for starters I just wanted to see if I could figure out what the problem was, and why it wasn't boosting. And if I don't find a problem, then I guess it's time to buy stuff. Oh, and it wasn't until just now that I remembered we were gonna try to have a little get together here in a couple weeks. :doh:
 

gjp

another post whore
Re: Looks like I've got myself started again.

What bolts you talking about. the turbo to manifold bolts or manifold to engine.? I had a hard time getting the oil line off the oil pan but it came off the turbo easy. I take it you took off the inner fender?
I just used a 15mm(I think it was 15mm) open end wrench to take off the turbo nuts. I can swing by tomorow after work for a while to help. or this weekend.
 

dgoodhue

BuSTeD 4.3
Re: Looks like I've got myself started again.

I had to buy a shorty wrench to get the upper left nut off, i used the short in combination because the shock tower is in the way. The other three came out easily. The stock down pipe will not come out in one peice (besides pulling the motor) if the cat is still attached.
 

live1053rulz

Nor Cal SyTy
Re: Looks like I've got myself started again.

It's the turbo to manifold bolts. I just took the compressor housing off, so now I think I can get to the upper right one. I'll try the shorty on the upper left like you suggested. They are 15mm. I wanna try to get this puppy off tonight. What should I look for to determine whether I should port this thing a little and clean it up and put it back together, or just dump it and buy some stuff? I'll let you know if I can use any help tomorrow evening if you've got time. I guess I'm not pulling the downpipe out then, unless I'm sure it's a gonner. Thanks.
 

gjp

another post whore
Re: Looks like I've got myself started again.

I measured my wrench. its 5 1/2 inches long. I had no trouble getting them off. It was putting on the new turbo that gave me problems. LMK how it goes and if you need help.
 

live1053rulz

Nor Cal SyTy
Re: Looks like I've got myself started again.

Putting the new turbo on? Uh oh. Haha. BTW, when you did that, did you have to cut the A/C bracket and inner fenderwell? I'm thinking yes?

My 15mm wrench is 7 and a quater inches long, and I also have a stubby one I've tried using. Maybe I need more of this break free stuff. I feel like I'm gonna round off a nut.
 

gjp

another post whore
Re: Looks like I've got myself started again.

I soaked it over night with liquid wrench. the stage one turbo was a direct bolt on to the stock manifold and DP. I had to only cut one of the manifold posts to clear the new turbo. I put in on, started it up then realized I had an exhaust leak. Had to take everything off to cut 1/8th off the post. It was hitting the housing and not letting the turbo sit on the manifold.
 

live1053rulz

Nor Cal SyTy
Re: Looks like I've got myself started again.

Oh shoot. I better goupe those things up some more. That's a bummer about having to take it all apart again. We shall learn from your mistakes. :lol:
 

gjp

another post whore
Re: Looks like I've got myself started again.

was not the first time I had to do things twice :roll:
 

Black Knight

I Glow Therefore I am
Re: Looks like I've got myself started again.

Steven are you having trouble just getting a wrench to go on the nut or breaking it loose? If just getting it to go on what everyone has already said is about all you got, it can be a pain if rusted and old. If you can't get it to break loose like Gary said either soak it awhile with some sort of penetrating fluid or run it till it warms up and then let it cool till you can touch it warm and the metal might have expanded enough to free it up. DONT spray anything on there while still hot or it could catch fire!!

The first time I took mine off one of the nut was cross threaded on the stud and the stud broke off in the manifold. Good times, had to pull the manifold and spend a bunch of time with a punch, drill, and a easy out. Good Luck!!
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Looks like I've got myself started again.

if you have any questions give me a call or pm me, i should be online through out the night.
 

live1053rulz

Nor Cal SyTy
Re: Looks like I've got myself started again.

Thanks, I'm soaking the bolts overnight and I'll give it a try again tomorrow after school/work. I can get to em, but can't break them loose. Thanks Branden, and I think I'm gonna shoot for Friday to head down and lend a hand.
 
Top