Fastest 60 ft times w/a stock torque converter no nitrous

It's just a six

Super Member
Just curious what is the fastest anyone(Sy/Ty) has gone (60 ft wise) w/a stock torque converter w/no nitrous? Tell me your stall speed also if you can.
My best, w/dried Nitto drag radials spinning was 1.71
My stall 2100 RPM no matter what boost pressure.
Thanks
 
Last edited:

Black Knight

I Glow Therefore I am
Re: Fastest 60 ft times w/a stock torque converter no nitrous

In a SyTy or anything, in a Sy :checkit: stock converter, no NOS, no drag radials.
 

Jimmy

Banned
Re: Fastest 60 ft times w/a stock torque converter no nitrous

Christina Keller went 1.68 in a stock but lowered Typhoon.
 

Ryda85

Senior Member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

lol between 1.6 and 2.2

you should be able to cut 1.8-1.9 with out even trying
 

turbodig

Active member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

1.59 was the quickest I've seen.

Yes, stock converter and turbo. Many, many moons ago.
 

PJ2397SY

Donating Member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

1.74 all stock except 2800 stall and air box
 

Vaders Sy

Donating Member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

1.67 sixty, 3200 stall 9/11 is mine.
 

JayLo

Sir Boost-a-Lot
Re: Fastest 60 ft times w/a stock torque converter no nitrous

I went a best of 1.85 bone stock (ok, I had no cat) on dry rotted tires and rear brakes that wouldn't hold boost (3psi burnout launches).

With the rear brake shoe/wheel cyclinder upgrade and fresh BFG g-Force rubber the truck seems to launch a bit harder with 5-7 psi, no wheel spin launches. I wouldn't be surprised if it went 1.75 or so at the track now.
________
Easyvape review
 
Last edited:

Ryda85

Senior Member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

so whats the verdict on this? whats the best 60ft with the stock converter?......it was a 1.68? is that with aftermarket suspension
 

It's just a six

Super Member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

Dig seen "1.59 was the quickest I've seen."
That is very impressive, even for a car that is set up.
I think I remember Daron said he ran a 1.61,, but I think he said that was a fluke???
 
Last edited:

blk00z28

Forced to by choice
Re: Fastest 60 ft times w/a stock torque converter no nitrous

I'm at a 1.73 with a 3k stall, street tires, and a shitty track. Thats with me leaving at 12lbs of boost. And my truck leaves like a pig. Ask anyone who's seen it launch in person. They ask why its so slow.:rotf: I do not know. lol. My 330ft times suck too, so I'm told.
 

TurboJunk

questionable
Re: Fastest 60 ft times w/a stock torque converter no nitrous

1.68 3200 stall, 7 psi launch, dry rotted 245/50/16's stock rims, lowered TY, stock turbo
it was only once thou probably a fluke.

i had consistant 1.70's. havnt gone to the track since i fixed stuff
 
Last edited:

turbodig

Active member
Re: Fastest 60 ft times w/a stock torque converter no nitrous

It's just a six said:
Dig seen "1.59 was the quickest I've seen."
That is very impressive, even for a car that is set up.
I think I remember Daron said he ran a 1.61,, but I think he said that was a fluke???

I think this one was too. I didn't believe it either, until I saw the timeslip.

I don't remember the tires he had, but they weren't factory.

The suspension was factory stock... as were the wheels.
 

TYTILIDIE

METH HEAD
Re: Fastest 60 ft times w/a stock torque converter no nitrous

1.8 stock. 1.74 with 2500(cheesy converter) and 20g launching at 15 psi with barely a chirp.
 

Don W.

Stab it and steer it
Re: Fastest 60 ft times w/a stock torque converter no nitrous

Best 60' in '06 (that I have in my log) was 1.759 on the mods below. Maybe not the best but not bad. Stock: Tires, trans, turbo, air intake, DP, cat, and muffler. The log shows and even 12 runs with below 1.8 60' times. Might be 1 or 2 more that didn't get into the log.
 
Top