Some questions on 18 degree heads (rocker arms, stands, etc)

Nasty Nate

The crazy LB4 FC Rx7 Guy
Hello,

I was just curious what rocker arms will work with the GM Performance 18 degree heads. Couldn't find anything in searches :(

Thanks,
Nate
 

Windedv6

Ty n 10s
Re: Some questions on 18 degree heads (rocker arms, stands, etc)

EBKRM-BowtieTTMotorBuild30.JPG


I used Jesels. You also may need offset lifters and may have to clearance the head for the pushrods. Custom valve covers are the norm, but some of the older cast aluminum covers will fit with some work on clearancing the ares around the push rod areas and where the rockers may contact the areas of the cover bolts.

On my heads you couldn't use heads bolts (studs are better anyway) because of the valve spring clearance to the bolt/stud area. I have to start the nuts on several studs before I can completely set the head all the way down on the block as the springs interfere.

My 18* bowties have 2.20 intakes and 1.625 exhausts valves and 1.60:1 and 1.65:1 rockers.

V-6 18° "359" Casting KCS-11308 $1,125.00
Jesel Comp Rockers


John
 

Nasty Nate

The crazy LB4 FC Rx7 Guy
Re: Some questions on 18 degree heads (rocker arms, stands, etc)

Thanks Guys! Is it best to buy directly from the respected companies?
 

Windedv6

Ty n 10s
Re: Some questions on 18 degree heads (rocker arms, stands, etc)

Yes... spend some time with their respective techs so you are sure you have all the right parts for your exact heads. I have seen so many speed shops mess up on things like this.

John
 

turbodriven

New member
Re: Some questions on 18 degree heads (rocker arms, stands, etc)

I would personally go with the Jesels. I have seen both and the Jesels look a touch better quality.
 

Nasty Nate

The crazy LB4 FC Rx7 Guy
Re: Some questions on 18 degree heads (rocker arms, stands, etc)

I plan on using the heads on a forced induction engine. Would the dish of a 8.5:1 piston accommodate a moderate cam (power band from 3,500-7,000), or should I look into custom pistons with valve reliefs?

Thanks!
Nate
 
Top