Bigstuff3.
- Thread starter angel
- Start date
Captain Morgan
Moderated User
Re: Fast System .
Re: Fast System .
I just purchased the new FAST system. Is there anyone out there that already has one that can guide me on how to use it? I'm going to pick up a used notebook tomorrow. :lol:
Re: Fast System .
Below version edited for spelling and grammar errors.angel said:
I just purchased the new FAST system. Is there anyone out there that already has one that can guide me on how to use it? I'm going to pick up a used notebook tomorrow. :lol:
the baPhoon
Active member
Re: Fast System .
Re: Fast System .
God i love this place.. lol
Re: Fast System .
God i love this place.. lol
UR50SLO
V6+2=LSXCamaro
Re: Fast System .
Re: Fast System .
I use the FAST system in alot of the GN stuff I do... I'm prity familiar with it. Are you selling your stock stuff
Send me a e-mail anytime for help.
UR50SLO@aol.com
Be glad to answer any questions I can!
~Scott
Re: Fast System .
I use the FAST system in alot of the GN stuff I do... I'm prity familiar with it. Are you selling your stock stuff
Send me a e-mail anytime for help.
UR50SLO@aol.com
Be glad to answer any questions I can!
~Scott
Re: Fast System .
Re: Fast System .
mike lee called me today and he wasnt able to get me the fast system . but good news ,bigstuff3 its on the way. maybe i will sell the stock w/3 bar with the chip. just got it tune by waller . excuse my spelling . just had a son month ago, going nuts.
Re: Fast System .
mike lee called me today and he wasnt able to get me the fast system . but good news ,bigstuff3 its on the way. maybe i will sell the stock w/3 bar with the chip. just got it tune by waller . excuse my spelling . just had a son month ago, going nuts.
UR50SLO
V6+2=LSXCamaro
Re: Fast System .
Re: Fast System .
Congratulations!!! and yes it's hectic... we have two boys that were only 14months apart... They are 5&6 now so we got it easy.
Big stuff's a good system too. Why are you going with aftermarket? Just curious... The stock system with Tuner Pro has as much adjustability and more than the FAST or Big Stuff...
You can get a complete setup with Autoprom (it reads/burns chips) and runs Tuner Pro for under 500.00 with 10 blank chips and G2 adaptor for our ECM's.
Now that I've got the swing of it I won't need a FAST for OBD1 ECM's EVER!
Thanks to JS/Mike Dob
~Scott
Re: Fast System .
Congratulations!!! and yes it's hectic... we have two boys that were only 14months apart... They are 5&6 now so we got it easy.
Big stuff's a good system too. Why are you going with aftermarket? Just curious... The stock system with Tuner Pro has as much adjustability and more than the FAST or Big Stuff...
You can get a complete setup with Autoprom (it reads/burns chips) and runs Tuner Pro for under 500.00 with 10 blank chips and G2 adaptor for our ECM's.
Now that I've got the swing of it I won't need a FAST for OBD1 ECM's EVER!
Thanks to JS/Mike Dob
~Scott
Re: Fast System .
Re: Fast System .
planing to build more of a radical motor for next year , so, by that time comes . ill be more sharp on tuning my motor . im looking at set brodix heads. im going to use mercruiser block & crank . see how that works out. im going to sell the stock ecm 3 bar chip .
Re: Fast System .
planing to build more of a radical motor for next year , so, by that time comes . ill be more sharp on tuning my motor . im looking at set brodix heads. im going to use mercruiser block & crank . see how that works out. im going to sell the stock ecm 3 bar chip .
92boostedty
Senior Member
Re: Fast System .
Re: Fast System .
ill take the 3 bar map what chip is it?...might take it as well
Re: Fast System .
ill take the 3 bar map what chip is it?...might take it as well
UR50SLO
V6+2=LSXCamaro
Re: Bigstuff3.
Sounds like a good build... I've got a source that can CNC port your Lil Brodie's... I'll have to check and make sure he's still around but he did a CNC job on mine back in the day. Flowed just over 300cfm on the intake.
Aftermarket has it's place but there's hardly anything this stock system can't handle with this software!
You'll have great results either way.
~Scott
Sounds like a good build... I've got a source that can CNC port your Lil Brodie's... I'll have to check and make sure he's still around but he did a CNC job on mine back in the day. Flowed just over 300cfm on the intake.
Aftermarket has it's place but there's hardly anything this stock system can't handle with this software!
You'll have great results either way.
~Scott