whats the approximate weight loss converting from w2a - a2a intercooling?

sy445

New member
i have the stock and aux atr heat exchangers plumbed w bigger pump in the truck. I wanted to replace the heat exchangers with one bigger aluminum unit in front of the radiator. Since this cost will be close to that of an a2a intercooler...... I was wondering if i replaced this w2a system with a a2a sufficient for 550 h.p. what the weight loss would be if anyone has experience w this?
 

Flyin Ryan

hated cuz he drives fords
Re: whats the approximate weight loss converting from w2a - a2a intercooling?

Well with a2a you have a core, a few pipes and a few silicone couplers with tbolt clamps. Your current setup on the other hand has a upper, lower with mounting bracket and aux ic, hoses, hose clamps, two ic pumps, wiring, an enough liquid to fill all that so with that said i'd have to say the weight savings would be decent when going with a2a.. but it all depends on the size and amount of piping your going with and how large of a ic core to say for sure. I used a core that was 14lbs and a minimal amount of piping as possible so I made out on the deal :)
 

gjp

another post whore
Re: whats the approximate weight loss converting from w2a - a2a intercooling?

Actualy I weighed the stock stuff. Lower,upper, all pipeing(3/4 hose) and the atr front cooler. Even the liquid. Then I weighed the rpm unit with all pipes,clamps and lower. Dont remember the weights but my note pad reads it was a 14 lb difference. Used a "put in box and stand on bathroom scale" way to measure.
 

sy445

New member
Re: whats the approximate weight loss converting from w2a - a2a intercooling?

14 lbs seems like a good amount but not worth the change if its costly. thanks for the replies. has anyone tried a bigger heat exchanger in front of the radiator and got lucky with results?
 

Flyin Ryan

hated cuz he drives fords
Re: whats the approximate weight loss converting from w2a - a2a intercooling?

sy445 said:
14 lbs seems like a good amount but not worth the change if its costly. thanks for the replies. has anyone tried a bigger heat exchanger in front of the radiator and got lucky with results?

There's a member on here by the name "anthony" which has done this and if I remember right it worked pretty good but he ended up selling the setup in favor of a a2a I think.. eitherway might want to pm him and ask about it and his results
 

leadfoot

Member
Re: whats the approximate weight loss converting from w2a - a2a intercooling?

Actualy I weighed the stock stuff. Lower,upper, all pipeing(3/4 hose) and the atr front cooler. Even the liquid. Then I weighed the rpm unit with all pipes,clamps and lower. Dont remember the weights but my note pad reads it was a 14 lb difference. Used a "put in box and stand on bathroom scale" way to measure.

This included the lower sheet metal/shroud for the lower cooler and pump?
 

Black Knight

I Glow Therefore I am
Re: whats the approximate weight loss converting from w2a - a2a intercooling?

Gary doesn't get on here much anymore so you may not get a response. I would guess he did weight with all that knowing him, but can't verify that.
 
Top