ABS Delete and Aluminum Drums Installed w/Pics

mrweelr

New member
Well, I spent the weekend shaving another 30 lbs. off the Syclone. Bought some aluminum drums from another forum member, had them turned, painted gloss black, and they bolted right up. The stockers weighed 12 lbs. and the aluminums were 6 lbs. each so ~12 lbs. saved with that upgrade. Today, I removed the ABS unit and that was good for at least another 20 lbs. with the various brackets etc. I can't really feel a difference in braking, but the truck does feel a little lighter/quicker. Coil overs are going to be next...will post pics when I take that project on.

AluminumDrums1.JPG

AluminumvsSteelDrums.JPG

AluminumDrums2.JPG


ABSDelete1.JPG

ABSDelete2.JPG
 

sytyguy

Moderated User
Re: ABS Delete and Aluminum Drums Installed w/Pics

Any trouble with the ABS delete kit? Looks like I may need to alter the bend on the rear line.....comes awfully close to the wheel well.

Hood
 

hatrik8

Donating Member
Re: ABS Delete and Aluminum Drums Installed w/Pics

Sweet. Looks good. It will be nice when I finally get around to deleting my ABS.
 

mrweelr

New member
Re: ABS Delete and Aluminum Drums Installed w/Pics

sytyguy said:
Any trouble with the ABS delete kit? Looks like I may need to alter the bend on the rear line.....comes awfully close to the wheel well.

Yes, I had to bend all of the lines to make them fit, but the metal is pretty soft so it was no big deal.
 

sytyguy

Moderated User
Re: ABS Delete and Aluminum Drums Installed w/Pics

mrweelr said:
Yes, I had to bend all of the lines to make them fit, but the metal is pretty soft so it was no big deal.

Yeah, that's kinda what I tell everyone.....bend it to fit your truck. The shipped shape is really just a rough template.

Hood
 

MrNurse

i'm no homo
Re: ABS Delete and Aluminum Drums Installed w/Pics

sounds kinda goofy, but are there any instructions on the install kit for the abs delete kit.....and your engine bay looks good.
 

AUSyTyIN

Unbusted $#it box
Re: ABS Delete and Aluminum Drums Installed w/Pics

Not only did you shed 12 lbs from the truck, you removed 12 lbs of rotating mass :tup:

Both of these are way up on my to do list :)
 

sy445

New member
Re: ABS Delete and Aluminum Drums Installed w/Pics

sytyguy said:
Yeah, that's kinda what I tell everyone.....bend it to fit your truck. The shipped shape is really just a rough template.

Hood

I had to bend mine too. That line going from the tee to the drivers side front was about 2x as long as needed. Worked out good though otherwise.
 

sy445

New member
Re: ABS Delete and Aluminum Drums Installed w/Pics

Where can we find aluminum drums? Can they be bought new?
 

sytyguy

Moderated User
Re: ABS Delete and Aluminum Drums Installed w/Pics

The ABS kit is pretty self explanatory, but I've posted pics of it uninstalled and installed

That line from the from wheel to the tee is meant to have a 90 deg bend in it. I don't pre-bend it because there are different brake hose setups out there and some need different angles, etc... You didn't leave it straight did you?

Hood
 

sy445

New member
Re: ABS Delete and Aluminum Drums Installed w/Pics

sytyguy said:
The ABS kit is pretty self explanatory, but I've posted pics of it uninstalled and installed

That line from the from wheel to the tee is meant to have a 90 deg bend in it. I don't pre-bend it because there are different brake hose setups out there and some need different angles, etc... You didn't leave it straight did you?

Hood
Lol, no i didnt leave it straight. I have a bender. It was a little frustrating getting it to flow downward with just a 90 deg bend because the lengnth i mentioned was too long, I made sort of a ? shape with it. its still worth it not to have to flare and bend all that myself. I still think its a good kit.
 

sytyguy

Moderated User
Re: ABS Delete and Aluminum Drums Installed w/Pics

sy445 said:
Lol, no i didnt leave it straight. I have a bender. It was a little frustrating getting it to flow downward with just a 90 deg bend because the lengnth i mentioned was too long, I made sort of a ? shape with it. its still worth it not to have to flare and bend all that myself. I still think its a good kit.

Ah....I must be getting too happy with the length on that line. I'll shorten future batches.

Hood
 

Black Knight

I Glow Therefore I am
Re: ABS Delete and Aluminum Drums Installed w/Pics

sy445 said:
Where can we find aluminum drums?

Here, E-bay, ect...

sy445 said:
Can they be bought new?

No, everytime I've ordered drums for a vehical that came with aluminum ones they send steel. From my understanding the aluminum ones are too expensive to manufacture when you can use steel.
 

ZavzTy547

Senior Member
Re: ABS Delete and Aluminum Drums Installed w/Pics

Black Knight said:
Here, E-bay, ect...



No, everytime I've ordered drums for a vehical that came with aluminum ones they send steel. From my understanding the aluminum ones are too expensive to manufacture when you can use steel.

Curious, how does the truck stop with the aluminum drums.
Zav
 

Black Knight

I Glow Therefore I am
Re: ABS Delete and Aluminum Drums Installed w/Pics

Never noticed a stopping distance change in any of the vehicals I've ever driven, just pruely less rotational weight.
 

gjp

another post whore
Re: ABS Delete and Aluminum Drums Installed w/Pics

Looks good Jeremy. I had my drums 2 weeks before you but mine are still on my shelf.
 

mrweelr

New member
Re: ABS Delete and Aluminum Drums Installed w/Pics

Yeah, but your rear shoes and cylinders need replacing if I remember correctly. Mine were rebuilt less than 5K miles ago with the 7/8" cylinders and Raybestos 514 big shoes all the way around. All I had to do is hose everything off, reapply bearing grease on the backing plate contact points, install the aluminum drums, and adjust the starwheels. Make sure you use Jasco metal etch on your aluminum drums first if you plan on painting them. Getting them turned is highly recommended too, let me know if you need help.
 

gjp

another post whore
Re: ABS Delete and Aluminum Drums Installed w/Pics

mrweelr said:
Yeah, but your rear shoes and cylinders need replacing if I remember correctly. Mine were rebuilt less than 5K miles ago with the 7/8" cylinders and Raybestos 514 big shoes all the way around. All I had to do is hose everything off, reapply bearing grease on the backing plate contact points, install the aluminum drums, and adjust the starwheels. Make sure you use Jasco metal etch on your aluminum drums first if you plan on painting them. Getting them turned is highly recommended too, let me know if you need help.
I will need help installing them and If you have the cyl upgrade part numbers. I dont plan on putting them on till I get my engine at 100%. Thanks Jer.
 
Top