adjusting the tv cable
- Thread starter 11secty
- Start date
91blazins10
Active member
Re: adjusting the tv cable
Push in the D shaped button and slide the black sleeve towards the drivers side all the way, then let go of the button and slowy rotate the throttle all the way open. It should click a few times.
Push in the D shaped button and slide the black sleeve towards the drivers side all the way, then let go of the button and slowy rotate the throttle all the way open. It should click a few times.
91blazins10
Active member
Re: adjusting the tv cable
well theres your problem thats why your sy isnt running right :lol:
Aeroking said:
well theres your problem thats why your sy isnt running right :lol:
George Blake
DONATING MEMBER
Re: adjusting the tv cable
It should click many times as it ratchets out. Some owner adjust and adjust and adjust. It wears out the plastic teeth. The TV is a setting. Not an adjustment per say. Once it's set. You leave it alone.
Click click POP. Or just POP is a worn out mech on the TV cable at the throttle body hookup.
It should click many times as it ratchets out. Some owner adjust and adjust and adjust. It wears out the plastic teeth. The TV is a setting. Not an adjustment per say. Once it's set. You leave it alone.
Click click POP. Or just POP is a worn out mech on the TV cable at the throttle body hookup.
B
BoostedGMC
Guest
Re: adjusting the tv cable
I adjusted mine and now it shifts hard as hell but there is a bang from 1st to 2nd shift. Is this a sign that I will have to be replacing my rear end soon?
I adjusted mine and now it shifts hard as hell but there is a bang from 1st to 2nd shift. Is this a sign that I will have to be replacing my rear end soon?
boosteds10
Finally Fixed
Re: adjusting the tv cable
When you open the throttle all the way, do you guys do it by hand or use the gas pedal? 100% throttle on the floor and in datamaster for me is less than me opening it up by hand. When I adjust it by hand softer shifts, by pedal, harder shifts. Which one should I go by?
When you open the throttle all the way, do you guys do it by hand or use the gas pedal? 100% throttle on the floor and in datamaster for me is less than me opening it up by hand. When I adjust it by hand softer shifts, by pedal, harder shifts. Which one should I go by?
Re: adjusting the tv cable
the correct way to adjust a 700r is to plumb a pressure gauge into the 1/8 pipe plug on the driver's side of the trans and adjust the tv cable between 60-70 lbs at idle, then the car out and drive (with gauge still installed), at wide open throttle in 2nd gear you should see 210 lbs of press. if it is an aftermarket tranny then you need to ask who ever built it for the pressure specs.
the correct way to adjust a 700r is to plumb a pressure gauge into the 1/8 pipe plug on the driver's side of the trans and adjust the tv cable between 60-70 lbs at idle, then the car out and drive (with gauge still installed), at wide open throttle in 2nd gear you should see 210 lbs of press. if it is an aftermarket tranny then you need to ask who ever built it for the pressure specs.