Dang, lent out my shop manual now need help!

huggles

New member
Can anyone please point out the location of the stock MAP sensor? I need to replace it and I lent my shop manual out to my friend who lives across town. I can't drive to pick it up because I tore my Supra apart and my Ty, well, runs like ass!

I mean, I COULD drive the Ty, but there is a local Dodge Ram V10 around here looking for revenge and it would be just shameful if he caught me at a light right now :oops:
 

SY2932

Administrator
Re: Dang, lent out my shop manual now need help!

It's located on the driver's side of the truck towards the back of the upper intake. It will have a three wire connector going to it as well as a vacuum line. I would take a pic of it but, I'm at work right now. This is what to bottom of it looks like:
IMG_0250.sized.jpg

"MAP sensors, stock 2 bar on left #16009886 and 3 bar on right old number is #16040749 new # is #12223861. On the topside where the plug connects, there is a number for identification. 1 bar MAP=039, 460, 876 or 883. 2 bar MAP=012, 539, 609, 701, or 886. 3 bar MAP=749 or 861. The 4 digit number to the right refers to the date of manufacture "1100"= 2001, 100th day of the year."
 

epix

Typhoon
Re: Dang, lent out my shop manual now need help!

its near the upper intake manifold, drivers side. looks like a black plastic box with 1 vacuum line and an electric socket
 

huggles

New member
Re: Dang, lent out my shop manual now need help!

Thanks for the help guys, I'm going to run outside and take a look at it. I can get another 3 bar locally for $60.... I hope this explains why it runs bad! The stock boost gauge is pinned at 15+ psi at idle and jumps around like it's on crack while I'm driving around. ( Not that I drive around much the way it's running... )
 

SY756

New member
Re: Dang, lent out my shop manual now need help!

Just don't confuse it with the MAP solonoid. It's right there in the same area but it has 2 vac lines connected to it w/ a electrical connector.
 

huggles

New member
Re: Dang, lent out my shop manual now need help!

Found it!

Thanks guys :) I'll replace it this afternoon. I can't see what sort of fastener is holding on my vaccuum line, I guess I should buy some zip ties while I'm out.
 

huggles

New member
Re: Dang, lent out my shop manual now need help!

Wow thanks Mike, this is what makes the Syty so good, if I had asked this on the Supra forum someone would just call me a noob, or would have posted why the Skyline's MAP is superior.

:p
 
Top