lots of stupid questions, i need answers

skipztt

boost
ok, i just got datamaster on my ty. it runs awesome when datamaster isnt hooked up. when i hook it up my idle is really high (like 1250)... :squint: i hope thats not stock, whick i dont think it is. can i change this?

also, when im slowing down for a stop sign the throttle seems like its sticking. almost like im still hitting the gas. i never had this happen before and i think it might be related to my weird idle. right????

i also have an overboost problem. i have a stock dp and a gutted cat. thats it. nothing from the cat back. yeah its loud :roll: :rotf: i know thats my problem. so my question is....ill probably upgrade my turbo this winter. i have 2 40mm hks wastegates sitting in a box at home. i wanna go around a 50-60 series turbo. not sure which one yet.

ive notice, like on the pt51, it has an interanl WG. i dont want that. i wanna go external for sure and control my boost perfectly. can i get the pt51 set up for external WG????? or any other series turbo???


its really late so bear with me. also how do i save a datamaster run??????
 

dgoodhue

BuSTeD 4.3
Re: lots of stupid questions, i need answers

skipztt said:
i also have an overboost problem. i have a stock dp and a gutted cat. thats it. nothing from the cat back. yeah its loud :roll: :rotf: i know thats my problem. so my question is....ill probably upgrade my turbo this winter. i have 2 40mm hks wastegates sitting in a box at home. i wanna go around a 50-60 series turbo. not sure which one yet.

ive notice, like on the pt51, it has an interanl WG. i dont want that. i wanna go external for sure and control my boost perfectly. can i get the pt51 set up for external WG????? or any other series turbo???

Any turbo can be setup for an external wastegate, so that isn't a problem. The PTE turbo's don't have wastegate/overboost issue ike the stock turbo.
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: lots of stupid questions, i need answers

for some reason my datamaster runs in aldl mode or some such thing when it is hooked up. like you said when it is not hooked up it runs fine, i have tried this on the 3 stock sytys i have and all do the same thing. i thought my problem was i am using a turbolink cable to run datamaster and it has a extra hookup into the aldl making it run in that mode. dont know for sure though
 

skipztt

boost
Re: lots of stupid questions, i need answers

Raist103 said:
for some reason my datamaster runs in aldl mode or some such thing when it is hooked up. like you said when it is not hooked up it runs fine, i have tried this on the 3 stock sytys i have and all do the same thing. i thought my problem was i am using a turbolink cable to run datamaster and it has a extra hookup into the aldl making it run in that mode. dont know for sure though



i have the extreme aldl cable from moates. it goes from aldl the a box with converts it to usb. it has no problems reading it at all. it just seems weird when i wanna record data.

also how do i save a datamaster run?
 

socalblue

New member
Re: lots of stupid questions, i need answers

When your car is running and u link the datamaster it will switch it into limp mode (ALDL I believe correct me if I'm wrong) which is a safe mode preset in the ECM .

You have to link the car while in the on position of the ignition and then start the car. I did it a few times myself...then it wont go into that mode. Also you can go to the mode section and make sure its showing Normal mode not the other modes.
 

nello

Active member
Re: lots of stupid questions, i need answers

I don't think I have the same cable as you but mine has a little on/off switch on the side...one position = high idle the other = normal idle. I called about this a while ago and i kinda remember being told it has to do with being able to use on other cars like a camaro. Double check your cable to be sure, the one that plugs into the ecm port.
 

skipztt

boost
Re: lots of stupid questions, i need answers

im going to try and mess with it more tonight. i can understand it going into limp mode also. i though when i did turn it on i had the key in the "on" position. but i dont really remember if i did or not.
 
Top