Moroso 11mm Plug Wires - Who's Running Them?

mrweelr

New member
I've had every wire imaginable on my Sy. The best I've used so far are the RPM Taylors, but I was thinking of trying the 11mm Moroso wires. For those of you running these, did you have to cut them yourself to fit or is there a custom application for our trucks? I don't want to have to cut and crimp the wires myself...anyone?
 

Flyin Ryan

hated cuz he drives fords
Re: Moroso 11mm Plug Wires - Who's Running Them?

don't have any experience with them but back when I had my buick I ran the magnacore wires and they were great but im poor now so the sy gets taylors :)
 

Norm

Donating Member
Re: Moroso 11mm Plug Wires - Who's Running Them?

11mm. Damn that's like a hunk of rope for wires.
 

Tooky

Serious about performance
Re: Moroso 11mm Plug Wires - Who's Running Them?

I know a local truck that is running 11.37 on pump gas and alky with a basic unported Vortec head/412 cam build, GTQ67 turbo, and AutoZone's cheapest plug wires (the ones in a blue box). However the truck has stock exhaust manifolds; I can't say how they would hold up with headers. :2cents:
 

AUSyTyIN

Unbusted $#it box
Re: Moroso 11mm Plug Wires - Who's Running Them?

I run the Autozone lifetime warranty wires (same warranty I had when I 1st bought them for the Sy :rotf: ) and I've never had an issue. Although I'm mostly stock, I have heard similar stories to Tooky's about fast trucks with cheapo wires. :2cents:
 

turbodig

Active member
Re: Moroso 11mm Plug Wires - Who's Running Them?

I've run the cheap wires for years. I never have any more problems than the expensive ones.

I like the Powermax 700908. It's belden wire, and actually has the correct SyTy boots.
The autolite pros are good too. Both are < $30.

Of more importance to good plug wire life, is making sure all the factory heat shields are on, and that the wires are wire-tied away from any exhaust parts. If there isn't at least a finger's worth of air-gap between the wire and the hot object, reroute it so there is.

The Cool-it boot/wire insulate sleeves help too. They're not magic, though, they can't be touching hot pipes either.

Taking your time with proper wire routing and using the silicone dielectric on the boots will go a long way to making sure that your tune-up is good.
 

mrweelr

New member
Re: Moroso 11mm Plug Wires - Who's Running Them?

turbodig said:
The Cool-it boot/wire insulate sleeves help too. They're not magic, though, they can't be touching hot pipes either.

Taking your time with proper wire routing and using the silicone dielectric on the boots will go a long way to making sure that your tune-up is good.

I do all this and I still go through a set of wires at least ever 2 or three plug changes. It's not the heat that kills them - a wire always ends up coming out of the boot/connector during plug changes. I don't like to recrimp/repair them once I damage one, so I just toss the set in the trash and order new ones. The fiberglass sleeves are a must, though, with headers. Unless someone knows if the Moroso 11mm wires are pre-cut for our engines, I'm going to just order another set of RPM Taylors.
 

Tooky

Serious about performance
Re: Moroso 11mm Plug Wires - Who's Running Them?

I used to break my Taylor wires just like you Jeremy......... UNTIL I bought the Taylor Plug Wire Puller Tool.

tay-43392_cp.jpg



http://store.summitracing.com/partd...AY-43392&N=700+400235+314326+115&autoview=sku


There is also a discussion in this thread: http://www.syty.net/forums/showthread.php?t=34904&highlight=taylor+plug+wire+tool
that contains some cheaper and DIY suggestions.

Since I bought the Taylor tool I have only broken 1 or 2 wires in the last 4 years or so. The wires I'm running now are about 2 years old!!
 

Windedv6

Ty n 10s
Re: Moroso 11mm Plug Wires - Who's Running Them?

I have used the 11mm Moroso wires before. They were ok, but I had the same problems as I had with Taylors and Msd. My problems were due to the fact I run a hotter digital seven box. It does helps keep the spark lit under high boost. I since went to the Moroso Ultra 40 wires and insulated sleeves I have not had a problem since.

Moroso Ultra 40 Wires

Insulated Sleeves

Buy a good crimping tool and you will be amazed how easy and fast you can custom fit your own wires.

Crimp tool

Do them right once and be done with it. I have had my set on for a couple of years now.

John
 
Last edited:

Don W.

Stab it and steer it
Re: Moroso 11mm Plug Wires - Who's Running Them?

The Taylor tool is a wire saver for sure. 'least in my garage. Taylor wires here. No issues. Heat boot on #6.
 

mrweelr

New member
Re: Moroso 11mm Plug Wires - Who's Running Them?

Windedv6 said:
I have used the 11mm Moroso wires before. They were ok, but I had the same problems as I had with Taylors and Msd. My problems were due to the fact I run a hotter digital seven box. It does helps keep the spark lit under high boost. I since went to the Moroso Ultra 40 wires and insulated sleeves I have not had a problem since.

Moroso Ultra 40 Wires

Insulated Sleeves

Buy a good crimping tool and you will be amazed how easy and fast you can custom fit your own wires.

Crimp tool

Do them right once and be done with it. I have had my set on for a couple of years now.

John

Those Ultra 40 wires do look sweet. I like the blue look a lot. If someone made these custom fit for our trucks, I'd be all over that; but I don't have the time or patience to cut, crimp, and sleeve my own wires. Summit only lists kits for V8 applications (sigh).
 

theflash083

New member
Re: Moroso 11mm Plug Wires - Who's Running Them?

what exactly would be the advantage of going with thicker wires?
 

4C FED

Absolutum Dominium
Re: Moroso 11mm Plug Wires - Who's Running Them?

Windedv6 said:
I have used the 11mm Moroso wires before. They were ok, but I had the same problems as I had with Taylors and Msd. My problems were due to the fact I run a hotter digital seven box. It does helps keep the spark lit under high boost. I since went to the Moroso Ultra 40 wires and insulated sleeves I have not had a problem since.

Moroso Ultra 40 Wires

Insulated Sleeves

Buy a good crimping tool and you will be amazed how easy and fast you can custom fit your own wires.

Crimp tool

Do them right once and be done with it. I have had my set on for a couple of years now.

John

I tried the do-it-yourself Ultra 40's, bought the good crimp tool & was very disappointed.
Truck always seemed to miss when going around a corner or when getting into boost.
Bought a set of Taylors and it was the difference between night and day.
It's kind of a PITA to strip wires espscially when they have the spiro core wire in them.
Surely it was my fault, but I wasn't thrilled with having to toss an expensive wire set.
 
Top