Oil dipstick w/Vortec heads

I am getting ready to put my new TY back together after a friend of mine convinced me to pull the motor out.(smart move) Can anyone tell me whats the deal with the dipstick tube has to do with vortec heads.My original tube was all messed up from being bent over too far clearance around a 4-bolt splayed cap was the cause.Is there another option maybe pointing it somewhere else?
 

jwaller

Evil Genius/SyTy Guru
Re: Oil dipstick w/Vortec heads

the vortecs do not have a place for the tube to bolt to. so a lot of ppl will wedge the bracket under the front exhaust manifold to tat it can be held in place. others will just let it ride using only the friction of the block to hold it in. it's your call.
 

MIGHTYMOUSE

Turbo F body guy
Re: Oil dipstick w/Vortec heads

i just put a 97 vortec 4.3 oil and dipstick tube into my truck.

it took a few hours of slight bending and cursing to get the tube in and bolted up, then another hour or so of bending the stick so that it would also go in. then after all that you find out that it crosses in front of one of the spark plug holes and have to start over...

now i just have to put the stick in facing the right way, and fight it down.. but it works! which is way way WAY better than not having one at all.
 
Top