Went to the dyno with graph

Well I put the sy on the dyno sat. Kinda dissapointed in the results. I will post the graph in a day or 2. Had REALLLL bad boost creep. Stated at 16 psi an creeped to 26psi yikes. I just put the 3.5" dp on and guess I will have to put bigger wg on it.:rant:

Made 524rwhp and 528 awtq Still need to tune it. Was on 17 deg of timing with 93 and meth.

syclone.jpg
 
Last edited:

Ross L

Member
Re: Went to the dyno

Re: Went to the dyno

incredible numbers! :tup: but I wouldn't call 16-26psi boost "creep" :rotf: again,,,,, great numbers!!!
Ross
 

Mtn Z

Donating Member
Re: Went to the dyno

Re: Went to the dyno

Umm....I want those disappointing numbers. :eek:
 

BigAl...

Member
Re: Went to the dyno

Re: Went to the dyno

If you don't mind posting, what are the specs of your cam, turbine wheel, tranny 60,80, wastegate?

BigAl...
 

TYTILIDIE

METH HEAD
Re: Went to the dyno

Re: Went to the dyno

Youre truck sucks, crush it. And you should be shot for putting down numbers like that, shame on you.
 
Re: Went to the dyno

Re: Went to the dyno

I am running the comp 422 cam, old school t76 4"in and 2.5"out I think its a p trim, ported stock exaust manifolds, 3.5" dp, atr wastegate, 700r4 with a 3200 l/u,ported vortec's,75# injsctors, big ebay i/c, eagale's, j&e's, 4bolt mains. I almost forgot CODE 59!!! Thanks again for coming out with ths guys!!

I think I found the boost walk. When I hade the 61 on the stock motor I had to crank the adjustment screw all the way down to get it to 28 psi, and I never moved it with the new build. So the w/g was only opening about 1/3 of the way.LOL Kinda pisses me of because if I hd found that on the dyno I am sur that it would have made a bunch more power. 25-26 psi at 3200rpm insted of 18psi

If anybody needs more info just ask. Sorry I sound like an ass I am proud of the numbers just was hoping for more.


Thanks Guys!
 

JSM

Active member
Re: Went to the dyno

Re: Went to the dyno

Remember peak HP and torque don't win races unless your racing a Supra.

I bet your graphs are fairly flat and the average HP and Torque is up there. Plus you stated already you have more tuning left to do. You will find more power just be patient and careful.
 

MRKING

New Parts for Old Trucks
Re: Went to the dyno

Re: Went to the dyno

Yeah , if your not pushing 600 hp you might as well throw a match at it .I cant believe you want me to run that bin on my truck , you should be tarred and feathered for sure . :lol: When my tranny isnt mad at me I will actually get to use what you gave me . Thanks again :tup:
 

ttypewe4jim

New member
Re: Went to the dyno

Re: Went to the dyno

I would take time now to check out http://www.jgstools.com/turbo/wgpg.html rather then using a peace of rubber they use a piston to control boost. Alot better control that way then if you would like even better control check into using c02 to control it also for even better control[size=-1] [/size]
 
Re: Went to the dyno

Re: Went to the dyno

Maverick87 said:
Well I put the sy on the dyno sat. Kinda dissapointed in the results. I will post the graph in a day or 2. Had REALLLL bad boost creep. Stated at 16 psi an creeped to 26psi yikes. I just put the 3.5" dp on and guess I will have to put bigger wg on it.:rant:

Made 524rwhp and 544 torque Still need to tune it. Was on 17 deg of timing with 93 and meth.
did you have the same set up and everything when you raced that T/A? That was a dope as video i might add! I feel you, im never happy with what i have.
 

ViciousV6

400HP/550FTLB
Re: Went to the dyno

Re: Went to the dyno

you need to swap out that ATR Gate for a Tial 38 MM gat which will bolt right onto the downpipe.

Detroit turbo sells them! Where i bought mine from.

Ralph
ViciousV6
 

cloneman315

Active member
Re: Went to the dyno

Re: Went to the dyno

yeah that thing should move still,i went in the 10s with a little under 500 at the wheels
 
Re: Went to the dyno

Re: Went to the dyno

blktyphoon said:
did you have the same set up and everything when you raced that T/A? That was a dope as video i might add! I feel you, im never happy with what i have.

No that was the stock motor.
 

THEMADTYPH00N

Active member
Re: Went to the dyno

Re: Went to the dyno

Speaking of which, do you have a link to that video of the race with the T/A? I was looking for it a while back and could never find it.
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Went to the dyno

Re: Went to the dyno

Maverick87 said:

So this is your stock engine with a pte61? What mods do you need to run that turbo ... I just got one and would love to swap it in.... but was waiting for my engine rebuild.

Did you ever dyno with the 61?

Would headers help your current setup?

Your numbers look great, same with that ebay intercooler!!! ---
 
Top