bought the wife a Ty

kraus

New member
Well bought the wife a 92 Typhoon today. Needs a few minor things.But other then that it is a really nice truck.She is really happy with it.I will post some pics of it tommorrow and will be posting some things I need 2. I was looking in the glovebox a found a Kenne bell knock sensor deal that i have no idea what it does? its got a bunch of settings and everthing is set a minimum.
 

Flyin Ryan

hated cuz he drives fords
Re: bought the wife a Ty

You might want to pull the pas side kick panel and black plastic trim piece under the dash on the pas side and pull the ecm down.. crack it open and make sure there isn't a kenne bell chip in there.. search for kenne bell or kaboom chip on here and you'll see why Im suggesting this

oh and congrads
 

kraus

New member
Re: bought the wife a Ty

Flyin Ryan said:
You might want to pull the pas side kick panel and black plastic trim piece under the dash on the pas side and pull the ecm down.. crack it open and make sure there isn't a kenne bell chip in there.. search for kenne bell or kaboom chip on here and you'll see why Im suggesting this

oh and congrads


i will if there is what chip do ya suggest for it.
 

kraus

New member
Re: bought the wife a Ty

alwayscode390 said:
Neat, but I wouldnt buy my wife that.... I would buy ME that ;) ---
i bought my self a 87 GN last year that is modedd to crud.She wanted the ty and besides I get to drive it lol.She already wants to up grad a few things but doesn't know what she wants to do ....
 

QWERTYphoon

Motley Driver Award 2009
Re: bought the wife a Ty

If there is a Kaboom chip in there take it out and replace it with a stock chip. Hopefully you have one or can find one because they are short in supply and hard to find. Hard wire the inter-cooler pump.(free) put a lower temp thermo stat on it 160degree. The most important thing "keep it running so you can drive it to"!
 

Sy777

Member
Re: bought the wife a Ty

I'm going to mod the above quote a little and say keep it close to stock to keep it running>
 

kraus

New member
Re: bought the wife a Ty

Sy777 said:
I'm going to mod the above quote a little and say keep it close to stock to keep it running>

has a few modes nothing severe it is going to stay close to stock.
 

Flyin Ryan

hated cuz he drives fords
Re: bought the wife a Ty

kraus said:
i will if there is what chip do ya suggest for it.

either a stock one or ATR pitbull street chip.. The atr chip is pretty much the same except for a few limits removed or upped and is a bit richer.. any other off the shelf chip is junk besides a custom, 10n1 or ultimate.
 

kraus

New member
Re: bought the wife a Ty

Okay here are the mods i found so far. I pulled the computer down has a KENNE BELL chip part #8026. It has a j&s electronics knock detector thing in the glove box also made by Kenne Bell,it has adial for sensitivity,and rev limit.. It has a 3 inch cat back exhaust.A 255 lph fuel pump, Kenne Bell regulator and fuel pressure gauge.I t has a front mount intercooler,mounted by front bumper area.And the injectors are red couldn't see numbers on them,guy got it from was told they were 75lbs,but who knows..

Obviously i need a chip where and who do I talk to .thanks in advance.
 

Flyin Ryan

hated cuz he drives fords
Re: bought the wife a Ty

kraus said:
Okay here are the mods i found so far. I pulled the computer down has a KENNE BELL chip part #8026. It has a j&s electronics knock detector thing in the glove box also made by Kenne Bell,it has adial for sensitivity,and rev limit.. It has a 3 inch cat back exhaust.A 255 lph fuel pump, Kenne Bell regulator and fuel pressure gauge.I t has a front mount intercooler,mounted by front bumper area.And the injectors are red couldn't see numbers on them,guy got it from was told they were 75lbs,but who knows..

Obviously i need a chip where and who do I talk to .thanks in advance.

Well stock injectors were RED in color but you can't really go by color 100% because aftermarket wise it just ends up telling you what manufacture it was not the size.. You'll have to check them closer to be certain plus and if im wrong someone correct me but I don't think kb sold any chips calibrated for 75lb injectors.. i'd bet you have stock injectors.

I think if it was my truck i'd post up a thread in the tuning section asking for a stock chip or atr pitbull and ditch the kb and js shit.. adjust the fuel pressure accordingly and see how she runs but that's just me. You could try searching to see if anybody ever had any good results with a kb and js knock control setup before??
 
Top