86 GN Powered Camaro back together.

UR50SLO

UR50SLO

V6+2=LSXCamaro
Here's pic's of the Car back together.

Special thanks to:

Webber Racing
PA Performance K-members
Champion Racing heads
Alot of good used parts from Turbobuick.com
Wife and kids for supporting my insanity.

Hope to go to US131 this Friday for some shake down runs and tuning.
I have about 300 street miles on it so far. I think it's quiter than last year if that's even
possible... Lol.

Now it's time to work on the wife's Typhoon.. .Yea!!!
~Scott :tup:

Camaro08.JPG


Camaro08 2.JPG


Camaro08 3.JPG
 
420

420

Broke Ass Racing
Re: 86 GN Powered Camaro back together.

That is some CLEAN work. Awesome, awesome job!
 
NJ93TY

NJ93TY

Donating Member
Re: 86 GN Powered Camaro back together.

That is sick, that just put a smile on my face. :)
 
UR50SLO

UR50SLO

V6+2=LSXCamaro
Re: 86 GN Powered Camaro back together.

Thanks.. :)

Here's a pic from last year...
The K-member and coil over conversion lowerd the front a bit (it's adjustable now too) but the exterior is unchanged other than changing the tires over to a ET Drag "Radial"

It's 250cid this year with the stroker crank and 6.325 K1 Rods. Hyd. roller cam.
Had the converter re-stalled. Seems just right now ;)

Here's a outside pic from last year.....

Camaro11.JPG


Camaro13.JPG
 
420

420

Broke Ass Racing
Re: 86 GN Powered Camaro back together.

So I'm assuming this is a 109 motor, with GN1's? What cam, and what turbo? :)
 
Luke

Luke

Fish sticks SUCK !!!
Re: 86 GN Powered Camaro back together.

love how the IC piping is run through the core support, thats prolly the only F body I would ever drive
 
UR50SLO

UR50SLO

V6+2=LSXCamaro
Re: 86 GN Powered Camaro back together.

It is a 109 block with a girdle. I went with a mild Hyd. roller from Webber Racing 214/218 with mid 500 lift. On a 113lca.
They were wanting me to go with the 224 cam but I drive this a ton on the street and responce is my main focus.

The turbo is a 76GTQ. 4" inlet 3" outlet and the RJC 5" adaptor for 5"downpipe.

Thanks for the nice replys since this isn't really a Sy/Ty. ;)

I'd not seen the "Bitch'n Camaro" Skit... I get it now Lol.

Maby I should re-grow my mullet and really fit in to the 80's Lol.
~Scott
 
UR50SLO

UR50SLO

V6+2=LSXCamaro
Re: 86 GN Powered Camaro back together.

Last year with the converter being too tight... (2.0 60ft's) 18lbs of boost on 92oct it went 11.19@123mph.
With stock crank/stroke/flat tappet cam. (same heads/turbo)
Hope to better that on pump gas and get the car back in the 1.4 60fts where it was when I put it together for a customer several years ago. He put the GN engine in one of his other cars and let this chassis sit. I ended up buying it. :)
Hope to go to US131 for some shake down runs this Friday.
~Scott
 
blk00z28

blk00z28

Forced to by choice
Re: 86 GN Powered Camaro back together.

Why'd you go with a 5" DP? Nice job on the car. Looks good with the stock hood on it, very stealthy.
Ok.gif
 
blk00z28

blk00z28

Forced to by choice
Re: 86 GN Powered Camaro back together.

On a side note, damn I wish we could mount all the accessory's that low on our motors.. :roll:
 
I

i8av8

Donating Member
Re: 86 GN Powered Camaro back together.

by the way, how many cup holders does it have? miiine has 2.
 
UR50SLO

UR50SLO

V6+2=LSXCamaro
Re: 86 GN Powered Camaro back together.

I went with the 5" downpipe for one... to see if I could actually do it.. .and two that's one area that you can't go too big on. It never hurts to lower the turbulance or restriction after the turbo.

The car is Very very quiet... and I'm not kidding. If it were not for the tires/rims you'd not even give it a second thought.

Man... this car ain't got no F*^&('n cup holders... it's a 80's mullet mobile LoL. I sure wish it had some damn cup holders... I spilled coffee all over myself the other morning. Glad I like it with ice to cool it down or I'd have had some hot nuts!

:)~ Scott
 
UR50SLO

UR50SLO

V6+2=LSXCamaro
Re: 86 GN Powered Camaro back together.

I had to have somthing that actually did measure 5" LOL
 
J

jpalmer

New member
Re: 86 GN Powered Camaro back together.

UR50SLO said:
I had to have somthing that actually did measure 5" LOL
Click to expand...
lol, but i have a hard time believing its quiet, do you have any vids with sound, or could you make one?
 
You must log in or register to reply here.
Top