Battery relocate & disconnect

Don W.

Stab it and steer it
I'm thinkin' fairly serious about putting the bat in the bed while I'm doing the engine rebuild. Does anyone have any pics of how they did their disconnect sw.? (NHRA rules ya know.) I'd like to not drill into any caldding or sheet metal. Maybe have the remote come out from under the rear cladding which should be to their liking?

Thanks
 

Norm

Donating Member
Re: Battery relocate & disconnect

Have it come from the tail light. I've seen it there on a few cars at the track.There night be a actual rule on where it has to be.
 

Don W.

Stab it and steer it
Re: Battery relocate & disconnect

Coming through tail light would work, (easily replaced) it has to be at the rear of the vech. and "clearly marked." I wuz hoping for a pic of what others may have done.
 

WyoSyclone

Active member
Re: Battery relocate & disconnect

How about having it come out through the hole for the spare tire winch? ...assuming you've removed your spare tire :D
 

Don W.

Stab it and steer it
Re: Battery relocate & disconnect

That would work also. No, I don't carry the spare.
 

Flyin Ryan

hated cuz he drives fords
Re: Battery relocate & disconnect

I'm thinkin' fairly serious about putting the bat in the bed while I'm doing the engine rebuild. Does anyone have any pics of how they did their disconnect sw.? (NHRA rules ya know.) I'd like to not drill into any caldding or sheet metal. Maybe have the remote come out from under the rear cladding which should be to their liking?

Thanks

Ed Hess has his setup like that.. might want to ask him for a pic or two of it
 

sy#2921

BAMF
Re: Battery relocate & disconnect

How about having it come out through the hole for the spare tire winch? ...assuming you've removed your spare tire :D

Thats exactly where mine comes out. You need to put a flat spot in the rod where it goes under the tailgate to prevent it from rubbing but over all its very slick. I can take pictures tomorrow if you would like
 

Don W.

Stab it and steer it
Re: Battery relocate & disconnect

Thats exactly where mine comes out. You need to put a flat spot in the rod where it goes under the tailgate to prevent it from rubbing but over all its very slick. I can take pictures tomorrow if you would like

That would be good. This entire rebuild is a long term project. As in I'm not planing on the truck racing until next spring anyway so whatever you throw my way is helpful.

Thanks
 
Top