Performance built upper SyTy Motor for Sale

[Windedv6]

This is the upper motor parts from my AWD Typhoon. Everything is ready to bolt on and go. I ran these heads with a 412 cam to 10.80s and with similar custom cam to the comp 422, I ran 10.60s. This was with my Ty weighting in at 4,150 lbs. This setup should easily run a Sy into the low 10s or high 9s. The had several different turbos on it. The 10.sec runs were with a pte72GTQ. Poir to that it ran in the 11.40's with a pte70 stealth. I used a FAST management system, but now there is is good chip tunes for the 75# injectors as well as code59.

I had the heads gone through and rechecked. New valve job and new seals. The upper intake is polished and the lower is powdered coated. The upper, lower and heads were originally ported and setup by Flowtech, a professional head shop in Detroit.

I listed out the costs and the discounrt on each item as well as the total discount. At this point I am only looking to sale this as a package. It worked great together and should stay together.

$4,400 for complete package.


John

 

[Maxtor]

Re: Performance built upper SyTy Motor for Sale

Not that John needs any props on the quality of parts he sells, but I have seen this setup in person and it is in exceptional condition.

If anyone is building a performance engine you should really consider this package. You simply can't duplicate this setup for anywhere near this price and it is PROVEN to work.

 

[ViciousV6]

Re: Performance built upper SyTy Motor for Sale

You might want to mention the Turbo you were using and also what was running stock ecm modded, code59 or DFI.

People will otherwise think they can bolt on and go 10's with stock turbo.

Ralph
ViciousV6

 

[TYHOGG]

Re: Performance built upper SyTy Motor for Sale

Dang man let me know if you are whilling to break apart the set. I would be interested in the tb, injectors, and rails.
-Adam

 

[Windedv6]

Re: Performance built upper SyTy Motor for Sale

You might want to mention the Turbo you were using and also what was running stock ecm modded, code59 or DFI.

People will otherwise think they can bolt on and go 10's with stock turbo.

Ralph
ViciousV6

Thanks Ralph. I added some info for the turbo etc. :tup:

On the flip side of your suggestion I would think anyone that would have interest would be somewhat understanding that there is always more to mods than the mod it self. Many people sell turbos, A2A's, cams, injectors, heads etc, with the premise that it was from their killer syty build. Let's hope these buyers have some knowledge of what they are getting into by the time they start buying mods.

John

 

[qbnkiller]

Re: Performance built upper SyTy Motor for Sale

bump fo a good buyer, seller, and long-time forum member.

 

[jhacking]

Re: Performance built upper SyTy Motor for Sale

John Left a message for you on your cell. I talked to my Buddy Greg , and he wants the complete packaged. :lol: He will get you a check to you this week.

Give me a Call when you get a moment.

Jamie

 

[Richie Rich]

Re: Performance built upper SyTy Motor for Sale

So have you posted your Code59 tune up on code59.org?

 

[MRKING]

Re: Performance built upper SyTy Motor for Sale

So have you posted your Code59 tune up on code59.org?

His Fast system doesnt use code59 bins . He was letting potential buyers know there are starter bins to work from out there in different forms .

 

[Richie Rich]

Re: Performance built upper SyTy Motor for Sale

Got ya. Thanks. I'm a little slow sometimes.

 

[Windedv6]

Re: Performance built upper SyTy Motor for Sale

I have ppl asking if this package was sold or if I would sell parts separate. This package has been sold. Thanks for your interest!

John

 

[1madgumby]

Re: Performance built upper SyTy Motor for Sale

Hey john do you have the F.A.S.T. program that you ran with this motor? If so can you e-mail it to me?

Thanks!

 

[Windedv6]

Re: Performance built upper SyTy Motor for Sale

Hey john do you have the F.A.S.T. program that you ran with this motor? If so can you e-mail it to me?

Thanks!

I have about 30 of them. Depending on which turbo I had on at the time, which injectors and which cam I was using. I had a 412 and a custom cam and used 50#, 75# and 84# injectors. Also I had different programs for pump gas, 104 oct, 110 oct, ect. and programs for different boost levels. Some were setup for a perticular day of racing depending on how cool or hot it was and how far I wanted to push it. It would not be wise to send you one that could mess your motor up.

Give me your total setup and I will send you one that is somewhat conservative. You can get more aggressive with it later when you know everything is doing ok.

John

 

[1madgumby]

Re: Performance built upper SyTy Motor for Sale

.020 over stock block
5.7" Eagle H-beams
JE pistons ( the good ones)
Vortec heads ported to the rpm upper intake
1.5 roller rockers
2.02 1.60 valves
RPM lower intake
Arizona speed 1050 CFM throttle body
ATR headers
PTE 72 turbo
RPM A2A ic
75 lb. injectors
3,000 lock up converter
412 cam

If there is anythig im missing let me know.

Thanks..

 

[Windedv6]

Re: Performance built upper SyTy Motor for Sale

.020 over stock block
5.7" Eagle H-beams
JE pistons ( the good ones)
Vortec heads ported to the rpm upper intake
1.5 roller rockers
2.02 1.60 valves
RPM lower intake
Arizona speed 1050 CFM throttle body
ATR headers
PTE 72 turbo
RPM A2A ic
75 lb. injectors
3,000 lock up converter
412 cam

If there is anythig im missing let me know.

Thanks..

Perfect! I should have remembered some of it as you told me most of it at the fall get together. Of course if I didn't write it down...

I will get one on the way.

John