Recent content by DynaGlide

Re: In a Fit of Immaturity... My Ty would do that (when it ran). Being a hyperactive drummer, I was always banging on the steering wheel as my drums, and the dash as my various cymbals. It never stalled on me, but if I whacked the dash whilst driving, it'd hiccup and then smooth out. It was...

Re: Dead or Alive 92 Ty, #0950: Nearly alive, in Santa Fe, New Mexico.

Re: Any tips or tricks to clean off the surface before putting the heads back on? A gasket scraper or razor, used in conjunction with a shop vac.

Re: Funny Short Problem Thanks for the replies! I was drunk when I posted the thread, and almost forgot that I had put it up! I'll check the grounds to see if I'm not connected anywhere I can see. Now I'm really motivated to either get this thing running or get rid of it. We just found out...

So, I haven't been on here in a while. I'd lost interest in my typhoon and was actually hoping that it caught on fire. Anyway, I have a short problem that is ruining my expensive AGM battery. Whenever I turn on the headlights, or more specifically the turn indicator lights, I've got a short...

Re: FS Extra parts If you've got the cruise cable still available I'll take it. Let me know paypal info and shipping cost.

Re: FS: Parting out 93 Typhoon (lots of mods/parts, etc) Hi Mike, Do you have the throttle cable in serviceable condition?

Re: Parting out typhoon I need a throttle cable if you still have it. Or if anyone knows of a cable that can replace ours, that information would be greatly appreciated. I spent half the day combing thru the junkyard for a similar cable.

Re: (wot) hesitation please help Not saying that this is your problem, but some bump back down to UR5s when they add methanol because of the decreased intake temperature. It may not be incredibly easy to change the plugs out, but at least it's relatively inexpensive.

Re: Top End Removal/Vortec Swap Wow, looks like you've run into some issues. Lucky for me, I've not had any problems getting my truck back together.:roll: Your thread has inspired me to perhaps fire my project thread back up. I'm nearing completion as well... four years in the making. :lol...

Re: ID These Ports Please Awesome. I thank you.

Re: ID These Ports Please Okay... There are two oil ports directly above the filter adapter on the block. There is one that is slightly higher and to the right of the port that I'm assuming is the correct port for turbo oil feed. Is this even an oil port? Do I need to plumb this to...

Re: Suggestions / How to Fix Upper Rear Shock Mount Wanted I use a handheld pneumatic shear which does the job nicely. I've also used a Metabo tool with a cut-off wheel when I was "fixing" the rear shock tower in my old Buick.

Re: Suggestions / How to Fix Upper Rear Shock Mount Wanted Best way to go about it is getting a piece of sheet steel and welding it in place. Make a template for the steel piece out of cardboard, and then cut your steel and weld it in. If you don't want to do the welding, you can fab up the...

Re: UK shipping court case fun Most insurance companies don't cover vehicles in transit.