Recent content by T-62typhoon

Re: ATR downpipe and ProGate 42mm ext wastegate work? --- I just went through the same thing. I have a atr downpipe and had there wastegate to boot. Had a bad overboost problem, but I put a turbosmart 38mm hi-temp wastegate and it controls the boost fine up to 24lbs on a t-62 turbo. What Im...

Re: Thanks Turbotime Go to www.coanracing.com. They have a list of converters to choose from. I was amazed on how much quicker the truck feels with the 2600 lockup over the 3500 non-lockup.

Just wanted to say thanks for the converter recomended by Eric @ turbotime. The coan converter 2600 lockup works great with the te-62 turbo. Quick spool up and drivability......

Re: Where to buy a 50lb ultimate chip ? Converter and all was 860 shipped. I know I could have had the chip reburned, but I've got another Syclone project I can use the stock ultimate on. Thanks for looking out.....

Re: Where to buy a 50lb ultimate chip ? He should and thanks for the reference........

Re: Where to buy a 50lb ultimate chip ? Ordered the 50lb chip with a 2600 stall converter to boot. Turbotime did a fine job..... Thanks

Re: Where to buy a 50lb ultimate chip ? Thanks man. I tried calling Turbotime and left a message maybe they'll call back.........

Re: Where to buy a 50lb ultimate chip ? How good are the Phil Long chips, are they similar to the ultimate (using the 3bar map and all).

I've got an ultimate 10n1 chip with 3bar map from stg racing for stock injectors. I upgraded to 50lb injectors and called Mccoy motorsports to see if they could retune the 10n1. Jerry said he could do it for 275. I'd rather buy a whole new 50lb chip setup and use the old stock ultimate on...

Re: Wastegates... Ordered a turbosmart ultra gate with their 2 stage boost controller. Should be fun now......

I have a 3500 art carr non-lock up with a te-62 turbo and I'm wanting to switch back to a lock up. Has anyone had good luck with ptc-b29xhd converters? The truck will never make more than 430 to the ground and I don't want to spend what I spent on the art carr....Just looking for a good lockup...

Re: Wastegates... Thanks man.......

Re: Wastegates... I can put a 38 mm tial in the place of the atr without any mods? It will bolt-up no with no problems on a atr downpipe. I hate to waste the money it it doesn't work... Just making sure not doubting your judgement.......

Which wastegates are most people using? I have a 3" atr downpipe with there wastegate and it doesn't flow enough for a te-62 turbo? Any thoughts..... Jerry Mccoy wants me to to a 46f tial.... Any input would be helpful....

Re: Baer Brake conversion I've got the 17" zr1 wheels on the truck, and I'm going to go the cheaper route for the brake upgrade. I like the corvette brake setup you've got. I'm sure it was much cheaper than the baer setup. I'd like to do the same with mine. I'm guessing that they would clear...