Recent content by TurboPhoon

Re: How to tell if the turbo is in good condition?? I would love to buy it but I bought one from a member here who said the turbo was good and had ~.015 inches of radial play. I got the turbo here and it has between .028 and .030 inches of play, so now I am trying to get ahold of the person...

Re: How to tell if the turbo is in good condition?? How much radial play should there be allowed?

Re: Custom Down pipe on TD06 20G I just emailed him, how much was it?

Re: Custom Down pipe on TD06 20G Thanks for the link and all the help guys Marq

Re: Custom Down pipe on TD06 20G I work in a machine shop and can make my own (we have a wire edm machine), I was just wondering what the final product looked like and how much material I would have to remove.

I am placing the stock SyTy turbo on my fiero and the guy that sold me the turbo told me that I "can make a custom DP that covers the factory wastegate puck so you can open that port up for better boost control". He said I should be able to find some posts on this but after searching for a...

Re: How to tell if the turbo is in good condition?? Thanks for your help guys

Re: How to tell if the turbo is in good condition?? I am looking at one online from a member here and this is what he said. I just dont want to pay to much for a semi-good/going to need to be rebuilt soon turbo.

I am looking for a good TD06 and was wondering what the specs are for the radial and lateral play, and anything else i should look at to tell me what kind of shape it is in? The turbo is not going on a Sy/Ty it is going on my Fiero which I am droping a 3400 v6 in. I am trying to see if I can...

Re: Squirt Squirt: The "How To MegaSquirt your SyTy" Thread I was going to run MSnS-E but I didnt want to keep my stock computer to run the iac, and didnt want to run two sensors for each computer (not to big of a deal). I think as soon as the GPIO board comes out MS-II will have an endless...

Re: Squirt Squirt: The "How To MegaSquirt your SyTy" Thread Also to let you now you can buy a 3 bar map sensor from glens garage or DIY that will go in place of your stock MS one and it is a hell of a cheeper than the gm one, I want to say in the $40 dollar range. I just got my Pontiac Fiero...

Re: megasquirt? Also if you are afraid of not knowing how to tune with a stand alone computer MS offers a program for FREE that will take your info from dataloging and will process it and will help make adjustments to tune you car in. The best part about it is that there is alot of people...

Re: megasquirt? My budy has it on his conquest. He got a intake manifold form somewhere out of the country so it has port injection insted of the tbi. He has also installed the ford edis igntion system, and all of this is ran on the old megasqurit system. He has a large turbo and the...

Re: LS1 Fronts Ceramic or Semi Metallic Pads I just put some ceramics on my ty and I hate them. They feel mushy compated to the semi's. I also happened to get them warmed up and the brake fade is horriable. I am switching back

Re: Vibration Under Accel. I just climbed under her and felt for play in the front propshaft and I can feel some play. I am going to remove it to make sure it is the problem Dose any one have a Gilbert propshaft they would be willing to part with???? thanks guys