Recent content by TyGuy18

Re: '92 #0018 Feeler Re: '92 #0018 Feeler Truck has been sold. On its way to Louisiana.

Re: '92 #0018 Feeler Re: '92 #0018 Feeler With all the extras I was thinking $3500. Original post now updated.

Re: '92 #0018 Feeler Re: '92 #0018 Feeler FYI... Made a few updates to the info and added a link to current pictures

Considering putting my truck up for sale. Wondering if there is any interest. The good: - Motor rebuilt at 168k, currently 178k (bored 0.030" over due to damage #6 from previous owner, otherwise stock rebuild) - Trans recently updated to resolve shifting issues (see forum post for details) -...

Re: Scan Master Malfunction Same thing just started happening to mine. I also have an issue where the O2 count will stay at 442 after startup. Takes a few tries of unplugging/replugging from the OBD port to get it to work.

Re: Help with prop shaft ID Never did figure out where this shaft is from but a Moog 240 U-joint fixed it

Re: *** Big Sale - Various V6 Parts *** Got my chip/injectors in the mail yesterday. Brian was a great guy to work with. Very helpful and amazing communication. Even paid for fragile handling out of his own pocket. Thanks again Brian! :tup:

Re: *** Big Sale - Various V6 Parts *** I'll take chip/injectors if current deal falls through

Re: Trans issue Sorry for the long delay. I have a pregnant wife and we have been busy. Actually going to be induced today! Here are the pressures with the modifications that were made: Shifter in P,N,D4,D3: Min TV=90, Max TV = 230 Shifter in Reverse: Min TV = 132 Max TV = 290 Shifter in D2...

Can someone verify that these are the correct front floor pans and body mounts for my '92? These are rockauto part numbers: Sherman 90540L Sherman 90540R Sherman 90579L Sherman 90579R on Shermanparts.com 905-40L 905-40R 905-79L 905-79R

Re: Trans issue I was able to finish the reassembly late Thursday night (10/6). Took it for a test drive and it was like a brand new truck! I drove it all weekend running errands and didn't have a single issue. When I get home tonight I will gather my notes and give a full write up of all the...

Re: Trans issue Thanks for the input fellas. In my talks with Dana he seems to know his stuff and his directions clearly show to install those check balls. I'll be honest and say I have no idea what function they have specifically and removing them may well be a viable option. But I feel...

Re: Trans issue In the middle my tear down I came across this... It appears as if the check balls above the separator plate were attempting to push past the partitions, causing dents/deformation in both the plate and the partitions. I received a new separator plate and different check balls...

Re: Trans issue Got a hold of Dana this afternoon. He suggested making a few upgrades while I have the valve body off (new gaskets, separator plate, check balls, TV valve fix, larger main boost valve, a few springs, etc). Seemed to agree with Dave about the sticking TV valve being the cause of...

Re: Trans issue Sent Dana (Pro Built Automatics) a PM asking about getting a new valve body gasket and the "cure" for sticking valves. Hopefully he checks his inbox occasionally.