Search results

Re: No oil to #5 exhaust rocker Ok, I was looking at the tool and when i start the drill, there is some oil seeping out around it. It doesn't have a perfect seal. I did look a t the lifter bore,lifter goes in ok no play from what i can see.

Re: No oil to #5 exhaust rocker That's what has me stumped, I even removed the lifter and started the drill, oil gushes out thru the opening. Tried turning the engine by hand a little at a time while priming right now but no luck.

Re: No oil to #5 exhaust rocker I washed it twice using the brushes, and presurized water.

Re: No oil to #5 exhaust rocker yes,swapped it already.

Re: No oil to #5 exhaust rocker I turned the drill on without the push rods and compared the the one next to it, there is oil coming out just not as much, I swapped lifters twice already from other cylinder and I get oil to those rockers, I ll try turning the engine while priming see if that works.

Re: No oil to #5 exhaust rocker Yes, made sure sure all valves opened and closed i tried another push rod thinking It wasn't getting a good seal with the lifter,swapped lifters twice.

Re: No oil to #5 exhaust rocker Sure did, I started the drill and gushes out.

Hi guys, I'm priming my rebuild on an engine stand, using a "perform priming tool,I get oil to all the rockers except to the #5 exhaust, have new lifters and pushrods, I swapped lifter from another cylinder and it works ok, I also pulled the rocker and push rod off started the drill and I can...

Re: sy parts for sale How much for the front bumper and the arm rest lid?

Re: syclone partout (engine parts added & prices) do you have any front cladding front bumper or rh and lh frt fender

Re: atr wastegate Thanks guys.:tup:

Hi guys, does anyone out there know what brand of external wastegate will replace the atr unit,or if any parts are available for this unit. I know atr is not in business. Thanks.

Hi Guys, does anyone on here know where I can purchase an ecm for my 91 syclone?

Re: chip I have 60lb inj. I just haven't put them in, I wanted to be able to start the truck,didnt know if the 60lb would let it with out the tune.

Re: chip I 'm texas far west,elpaso no local tune shop for this thing here though,im kind of on a time schedule,i have to trailer this thing to houston on saturday. So I was trying to get a chip by then.

hi guys, newbe here, need help getting chip from a reputable source for a 91 clone,bought the truck a couple of days a go for my son,guy I bought it from had just put vortec heads and cam on a 114 center truck starts,idles like crap and throws a code 45,check fpr,checked ok, did a search but...