Search results

  1. 1

    Hotchkis Sway Bar Kit for Tahoe/Yukon

    Brand new in the box Hotchkis Sport Sway Bar Set P/N 2249 for 2000-2004 Tahoe/Yukon (may fit other models and years). For 2WD and 4WD trucks that have been lowered 2"-4". Front bar is 1 7/16" and rear bar is 1 3/16". Cost $528.98 plus shipping from Summit, will sell for $300 plus shipping and...
  2. 1

    Fresh L35 Heads SOLD

    This is a pair of L35 cylinder heads fresh from the machine shop. They have been cleaned, magnafluxed, and completely reconditioned with new stainless steel Manley valves, new springs that are good for .550" lift. They have had the deck skimmed and a multi angle valve job with bowl blending. All...
  3. 1

    Accel Gen 7 DFI Setup for SyTy

    This is a complete Accel Gen 7 DFI setup version 4.0 with a SyTy specific harness. This was originally installed in Ed Hess' truck and tuned by Harry Anderson (QUICKV6 on this forum). Includes plug and play SyTy harness, injector harness, WB02 set up, and brand new Accel dual sync distributor...
  4. 1

    Factory Intercooler and Heat Exchanger

    Complete Factory Upper Intercooler and Lower Heat Exchanger. Includes upper intercooler with cap, lower heat exchanger with frame, steel coolant lines, all three intercooler brackets, and turbo and intake hoses. Does not include coolant pump. Everything is in good condition with no damage. $250...
  5. 1

    Complete Upper and Lower SyTy Intake

    Complete Upper and Lower SyTy intake setup. Includes throttle body, Typhoon fuel rail, EGR and all brackets and sensors. Lower intake has been port matched. Removed from a 50K mile motor. $400 plus Paypal fees and shipping from 18929.
  6. 1

    Used Vortec Heads with Rockers SOLD

    One pair of used unmodified Vortec heads. Casting number 12557113. Removed from a good running 70K mile motor. Include factory pedestal rockers. $200 plus Paypal fees and shipping from 18929. These weigh approx. 37 lbs each. SOLD
  7. 1

    Typhoon Front Quarter Cladding

    Typhoon driver and passenger side front quarter cladding. Very good condition, no cracks or damage, no broken tabs. Will need to be painted. $150 each plus shipping and Paypal fees.
  8. 1

    Typhoon Rear Arch Cladding

    Typhoon passenger and driver side rear arch cladding. Very good condition, No broken tabs. Will need to be painted. $125 each plus shipping and Paypal fees.
  9. 1

    Need help to identify turbo

    I have a stock syty turbo that has a different impeller than stock. Does anyone know what it is? I have attached photos showing what looks like dual fins.
  10. 1

    New Aluminum Water Pump for SyTy SOLD

    New aftermarket aluminum water pump for syty. $50 plus shipping from 18929. Can deliver to NASTE Fall Meet
  11. 1

    Typhoon Door Cladding

    Driver and passenger side Typhoon door cladding. Factory black with gold Typhoon stickers, will also fit Syclone. Excellent condition, no damage, these could be treated with Back to Black and used as is. $100 per side plus shipping and Paypal fees. Can deliver to NASTE Fall Meet
  12. 1

    Typhoon Driiver Side Rocker Cladding

    Driver Side Typhoon Rocker Cladding. Very good condition, has been painted silver but could use a repaint. Very small crack at the rearmost sill area, easy fix and unnoticeable. Will repair for additional $20. $250 plus shipping and Paypal fees. Can deliver to NASTE Fall Meet Send PM with...
  13. 1

    1 1/2" Billet Wheel Spacers

    Slightly used pair of 1 1/2" billet wheel spacers for SyTy. Includes wheel studs and mounting lug nuts. $50 shipped to lower 48 states
  14. 1

    Factory Downpipe SOLD

    Nice unmolested factory downpipe with mounting bracket and fairly new O2 sensor. $80 plus shipping and Paypal fees. Can deliver to NASTE Fall Meet.
  15. 1

    SyTy Exhaust Manifolds/Crossover and Turbo SOLD

    Set of factory SyTy exhaust manifolds with crossover pipe and stock turbo. Removed from 95K mile motor. Manifolds are in good condition with no signs of cracks or damage. Turbo has typical side play and shows no signs of damage. Motor ran fine when parts were removed. Includes boost solenoid...
  16. 1

    New Eaton 7.625" Posi Unit SOLD

    New Eaton p/n 19599-010 7.625" posi unit for stock syty 28 spline rear. $400 plus shipping and Paypal fees
  17. 1

    New Edelbrock 2111 Intake

    New unaltered Edelbrock 2111 Performer intake manifold. Will fit stock syty heads or redrilled Vortec heads as well as most 23 degree bowtie and aftermarket heads. Includes six machined injector bungs for EFI conversion. $175 plus shipping and Paypal fees.
  18. 1

    50lb Injector/Chip/MAP package

    Six 50lb PTE Injectors and Phil Long V5 50lb multi-chip with 3 Bar MAP sensor. Requires a Moates switching adapter and remote switch to access all programs (about $80). Used approx 10K miles. Price lowered to $250 FIRM including shipping in lower 48 states. SOLD
  19. 1

    (6) 63lb Siemens Mototron Injectors

    Set of six 63lb Mototron High Imp Injectors for SyTy from Racetronics. New in the bags, flow matched within 1%. $300 shipped in the lower 48 states plus Paypal fees.
  20. 1

    ATR Billet Wastegate

    ATR Billet Wastegate, used approx. 20K miles, worked fine when removed a few years ago. $65 shipped in the lower 48 states.
Top