Search results

I pulled out my motor last month just to Fix all the oil leaks and change out the timing chain and rocker arms nothing internal When i First Start it its Idles good for about 2 min then all hell brakes loose its starts missing and has a Very Bad Idle from 600 rpm to 1000 rpm like its hunting. I...

I Have a A/C Problem when i turn it on it the compressor sounds like its Eating its self. I want to Convert to 134a but i dont know how.. ?

When i start my truck it idles from 1000 RPM down to 500 up and down. and my truck almost dies, Plus it sounds like a bad header leak from drivers side. BUT when i take it out and punch it once or twice it get back to normal running. or when it warms up too. it starts to run good. What could it...

im in the middle of Re-piping my intake to the turbo does anybody know how large the turbo intake is i have to Pipe and hose and i dont want to tear it all down just to measure it. What it is im going to order a 90 degree elbow but i dont know the size of the turbo intake.

im working on converting my LEAKING Stock remote oil filter system with a Billet Aluminum Remote system. There is a place to screw the remote system into the engine block but the little tube that that for the screw on type filter is missing due to the stock setup does anybody know the size and...

I keep getting a Code 43 i changed the knock sensor with a new one and still get the Code 43..

I have the Kenny Bell Big Boy intercooler on my truck with ATR Headers i want to get a Bigger Turbine like a Stealth 70 will it clear my AC unit and my intercooler pipes or what turbine will fit with me keeping the AC unit and intercooler.

I just put another engine in my 92 typhoon the newer engine has 48,000 miles on it but when i try to time it to zero it runs like crap but if its set to 4 or 5 degrees advance it runs Great but still i can tell its advanced so all the power is not there. ive tryed pulling both of the ECM Fuzes...

How do you remove the powersteering pully from the pump !!!!!!!! i just cannt figure it out..

Does anybody know how many FT Lbs and torque pattern for heads!!

Im looking at changing over to an Electric Fan and Electric Water pump i know i will have to get a New Belt and does anybody know what size belt or where i can get one plus what size electric fan should i get? Belt part numbers would be nice...

Im building a New engine and im trying to buy Aluminum rocker arms for my 95 L35 heads but everywhere i look i see Different ratios 1.5 and 1.6 Which ratio do i need to buy?

I have just recently purchased a 4.3L block freshly bored out .30 over i want to convert the block to 4 bolt mains some people say i have to have a alignment bore done after i have the 4 bolt mains installed is this true or can i just have to 4 bolt mains done without another alignment bore.?

Im building a New engine and looking for heads i see there are many types to get L35's, Brodex, Bowtie, Pontiac heads Which ones are the best and Which ones will bolt up to my intake and block i would like to go with aluminum but i dont want to buy something that will not bolt up..?

Im in the process on Building a New engine for my Typhoon and im looking for L35 heads does anybody know the CASTING NUMBERS for L35 heads or what to look for when buying them.

This weekend i replaced the Valve Covers to Eldebrock aluminum Now i have a Funny Vibration comming from the Engine kind of like a moan when it comes when its under boose about 2000 RPM and up. my Plugs, Wire, Distributor cap is about 6 months old, not only vibration but loose of Power and...

I keep Blowing my ECMB Fuze ive blown 3 in the last 2 days i checked it after i got home today and the fuze started melting but didnt blow HELP if anybody has any info i need it this truck it is my daily driver. :cry:

Has anybody ever tryed to change there interior Color and it they have tryed do thay have any advice.?

Im looking at installing a Fuel to Air Ratio Gauge is it easy to install and is it worth the money?

Im need the drivers side rear corner cladding some one hit my truck in a parking lot and smashed only the cladding on the corner THANK GOD only that. would be nice if black but any color is ok. im planning on getting my truck repainted this spring.