Search results

Re: Project: Syclone 0066 Well been hard at this truck.. Finally got all the brakes fixed and working, still throwing a brake light and ABS light. Also switched out the motor on drivers side window, old was not working. Also the lock cylinder seemed weak and wouldn't actually lock the door so I...

Re: Taillight wiring issue First thing I did today was check the ground on core support and made sure it was a fresh ground. I also replaced the rest of the builds, backup, front bulbs and license plate lights. It ended up being the ground on the rear harness to frame. The wire broke inside the...

Re: Taillight wiring issue Sorry I was not specific, I tend to forget which I'm working on. This is for my syclone. Thanks for the info Dave, I'll check it out tonight and report back. I did clean the ground on the frame but didn't change anything, I hit the brake lights and the reverse lights...

Hey guys I'm fighting a brake light issue. I was wondering is there only 1 ground wire on the harness to frame for the rear lights? Should be in the C section of the frame correct? All my front signals and light work correctly but the back does not. I also replaced the bulbs last night since...

Re: Project: Syclone 0066 Well, changed the coil tonight, in fact it was the original.. Amazing what difference that made. Motor purs like a kitten now, no rough idle and quick throttle response. I then started on the rear brakes.. The rear brake line was capped at the abs box. Seemed I fixed...

Re: Project: Syclone 0066 My white ty is getting a full motor build.. Waiting for the block to get done at machine shop, but it's getting full works.. All forged, bored, Holley hp, e85 fuel system, atr headers, bigger turbo, yada yada.. Just waiting for them to finish the motor and I should...

Re: Project: Syclone 0066 Well I'm chasing a idle miss. Seems someone else also did the same thing with all the replaced parts. After the tune up it ran much smoother, but once you give it a rev, and the idle comes back down its a bit rough and then finally calms down. I found no vacuum leaks...

Re: Project: Syclone 0066 Finished the Ignition part of the tune up today along with the compression check. All cylinders were between 133-137psi so that's a plus. Plugs didn't look to bad but I'm sure the new plugs I installed didn't hurt. I got a chance to fire it up before attending Easter...

Re: Project: Syclone 0066 I've seen a few new parts looking around. Fuel injectors aren't originals, distributor looked recently new.. You come across them again let me know! Thanks

Re: Project: Syclone 0066 Correct.. I was very cautious at first, I wanted to know why Ian got out of it so quick. I wasn't sure motor was bad or something. The bed has also been swapped to a clean bed since Ian owned it

Well I recently found out I will be expecting my first child with my wife, which got me thinking time to sell the motorcycle. Some of you might have seen my wanted add earlier this week about wanting a syclone.. Well I ended up getting a quick sale on my Harley. Time to think safe!!! I had...

Re: WTB: syclone Bumping this

Re: Rip 1gdct18z1p0810806 Supposbly some guy bought this typhoon at a auction after the fire and brought it to to Chicago everywhere. This guy Bought my parted out typhoon roller to switch everything from the typhoon posted above to mine. Not sure if it ever happened though, he got a lot of...

As title states, need some high rise valve covers as my stockers won't clear with my new setup. Let me know what you have please. PayPal ready

Editing my original post about this. I'm looking for a syclone, preferbly Midwest I can pick up and bring home. I'm not expecting perfect by any means, but ask it's running/driving or atleast close. I had a syclone in the works but deal fell threw. Have cash waiting for right truck. Looking to...

Re: Running Lean..need a lil help. Could be okay at idle but can't keep up on boost

Re: Running Lean..need a lil help. Have you ran a fuel gauge on it yet? Also how much fuel is in the tank?

Re: Typhoon Bolt in 4 Link Success The service at suicidedoors has majorly gone down. I used to buy there products in the past, but with the bagging scene getting so big during that time, he could not keep up with supply and demand. I know he lost a lot of his employees to. I'm friends with him...

Re: Ugh.. Ty pass rear cladding needed I sprayed the bolts for the arch side with pb blaster and let it sit a while and they came out without issue. I'm sure other trucks are different though. My cladding has also been off before though for paint by a previous owner

Re: Ugh.. Ty pass rear cladding needed Arch doesn't need to come off but rear bumper does to drill rivets