Search results

I'm thinking about caging the truck and thus I would not be able to keep most of the interior pieces so I want to gauge interest in the entire interior as a whole. I don't want to part it out piece by piece at this point so please dont ask. Very nice interior from my 92 Typhoon. This is the...

ALL SOLD Here it is! Almost new, everything has less then 2500 miles on it! Every Sensor and Bolt Was Replaced! I snapped the crankshaft and have decided to put an LS in it instead of rebuilding a 4.3 again so everything 4.3L related must go. I want to try and sell in groups of particular...

Here is a nice turbo for a stock bottom end, I unfortunately blew it up trying to make big numbers on my built bottom end. I caught it before it totally grenaded so it just has shaft play and is noisy! It is custom modified to fit SYTY platforms with water air setups and an external wastegate...

Ok so this is the third time I've done this to the Ty, First time I blew the head gaskets, second time I didn't check the clearance on the Eagle Rods and finally this last time the shop F'd up the welding on the oil pan turbo return line bung. Now its finally all back together and in the truck...

I have a few parts leftover from my build, I'd like to offer them all to you now that my trucks actually on the road again. Prices do not include shipping, paypal or cash only, keep it simple. Multi chip setup, dont remember which one specifically is, I lost the paper work when I moved I...

She finally hit the road this weekend after 2 years... Project still isn't done just yet, ATR upper cooler will be here this weekend, the stock cooler had horrible heat soak at just 13psi and still managed to put down 275 AWHP and 334 ft/lbs uncorrected on a Dyno Dynamics which are known as...

Well my build is finally almost complete but the last 4 stock items are having issues now lol. The stock upper water to air box is leaking out of the overflow nipple since I put a mazier pump in the system, I saw ATR makes an aftermarket option but can't find them or anyone who sells them? Any...

Looked it up, have been struggling with trying to wire my innovate lc-1 with xd-16 gauge. I can wire it just fine without running it to the ecu but my tuner said if I can he would like it to run to the ecu. Im running code59 too. Now everything I can find is for the 7 wire setup and a different...

Ok so just putting the engine back together the second time since the rods were hitting the oil pan and I didn't seal the head studs:oops:... now when I was going by the book for the rocker arm adjustment/tightening and the first time we got them all done we turned the engine over after and by...

as stated, thanks in advance

Trying to upload a breakin tune on the truck since the full rebuild. It was completely stock but is fully built now so we are reducing the fuel for break in. We are having troubles uploading the new program. I beleive that the previous owner may have kept a cord needed for uploading. I have a...

Well the last couple things I did not replace on the build are proving to be broken... figures. no idea what brand the one that came off it was, any ideas? TIA

Anyone have a picture of the ecu wiring? New boost controller needs an RPM signal. Thanks in advance!

So just finishing the last few little things before I start her up again. but, kinda forgot where the msd wires are supposed to be going. Thanks in advance!

Well she is finally almost back on the road again! Although I thought I was getting close 3 months ago, but I really think I'm within a week or two from starting it. Had some free time finally last week to get a lot of little things finalized so I figured I'd share with everyone. It's been a...

Completing my full build finally and trying to figure out the last few little things which include which spark plugs I should be running with the new garrett GT3076R? Going to be using code59 tuning for multiple files - 91,91 + meth,100,100+ meth, and 116 oct Thanks in advance!

So the abs in the Ty doesn't work, no lights on the dash but it just locks them up when I hit the brakes. It does have corvette c5? brake on it in the front and the stock drums in the rear. Is it because of the bias? Any idea? Thanks

So I'm finally just about to reassemble the ty finally after a full build. The last big thing I need to do before I put the engine back in would be to change the fluids but I'm not sure what you guys would recommend for fluids. It is my daily driver and will be taken snowboarding so it will be...

So The last part of the front suspension I need to redo are the lower bump stops. But, they all say they do not fit syty. Any idea where to find them? Thanks!

Ok, so im new to the typhoon scene and am off to a great start! Coming from the euro tuning scene i'd say im used to problems and tuning issues. But, this is a good one even for me. Drove the Ty for three days before at least one head gasket blew on my way home. Now the engine was built along...