Search results

Re: L35 heads Nolan(10secty) can easily tune your truck. I wouldnt put stock heads back on if you have l-35s laying around, I would say you could run those with the stock tune and not be very far off either. The syty's have come along way in tuning over the last couple yrs now too, moates has...

Re: C5 brakes You can get all that stuff through parts stores also you don't have to go to the dealer I didnt. Boots are a carlson #16114 Anti rattle clips are carlson #P731 Combo kit, boots and rattle clips carlson #H5634QBolts carlson #14121 The mounting bracket can be bought through kore3...

Re: FS: Baer Brakes setup $1800obo Re: FS: Baer Brakes setup $1800obo Hmm I am pretty sure those are ls1 rear brakes. Didn't the lt1's have the racheting caliper for the parking brake? Its pretty obvious that these have the internal drum parking brake because of the little arm coming...

Re: edelbrock tie rod sleeves part number I have a set of the edelbrock sleeves on my sy, they gave me 3 left hand thread nuts and 1 right hand thread :rant: I have found out we have the uncommon thread size tie rods. From what I can come up with ours are 11/16 where as most others are 5/8 or...

Hi Everyone :D Well changing some things around like every syty owner does and its time to put some parts up for sale! 20 gallon triangle engineering aluminum fuel cell, foam filled with sump I had one bung added to the top, one for return -8, one for vent -6...

Re: Anyone have an extra set of these gauges they wanna sell? They look nice :D Sucks to hear about the gauge though, I know there was a spot to write something and thats all I did. I didn't hear a word from them but when they showed up there was no gauge :D I think I did mention like a sonoma...

Re: Anyone have an extra set of these gauges they wanna sell? Not sure who your talking to about the autometer gauges but they sell a fuel pressure gauge thats not digital, the only one I know that you can only get digital is the wideband o2 sensor(6178) The fuel pressure gauge your looking for...

Re: Anyone have an extra set of these gauges they wanna sell? Cool can't wait for you to get them :D Did you get them stock style or did you eliminate the stock boost gauge?

Re: WTB Triple Gauge Pillar Pod Thanks Mike for the pic :D I found the install instructions http://www.autometer.com/productPDF/1157.pdf Defiantly crappy instructions but you must reuse the old pillar for sure. I wanted to make sure that I didn't install it wrong for some reason :lol: as I...

Re: WTB Triple Gauge Pillar Pod I will just say I have the lotek pod and the autometer pod and I like and hate both of them. The next pod I buy will for sure be the autometer though. The lotek uses factory mounting screws to mount it which is very nice and works great. Autometer makes you...

Re: Anyone have an extra set of these gauges they wanna sell? Email sent :D I was also looking at the options they have and they do have a reverse indiglo white face but with dark blue letters, might be dark enuf that they look black? Something for ya to look at might be an option! Post pics...

Re: Anyone have an extra set of these gauges they wanna sell? Send me an email, I will forward you the email they sent me, it has the order # plus all the options so you can just punch them up on there website. Not sure if you have gone to there site yet...

Re: Anyone have an extra set of these gauges they wanna sell? http://rides.webshots.com/album/573126583nbLTDB I don't have any with them lite up mainly because I haven't wired them in yet, working on getting the truck running first :lol: If you go to speed huts site you can see what they look...

Re: Anyone have an extra set of these gauges they wanna sell? Have you looked at speedhut? I am not positive if they do a white face with just the numbers lighting up but check there website and maybe call or email them asking if they could do it. I ordered black face and the numbers glow...

Re: DPT Al Dustan performance technologies coilovers I had a set of the control arms and coilovers from the last gp, can't remember if I had the rest of the parts or not. Concern about the control arms made me buy Jeffs and sell these. If I remember right my control arms are on one of Roberts...

Re: Non b/s cam in Balanced shaft engine Found the tsb info today, what I got from alldata #23-61-11 Engine-Tick or Rattle/Detonation or Rattle Noise Very interesting reading material

Re: Non b/s cam in Balanced shaft engine Wohoo I was right about the cam, wasn't 100% cause its been a little while since I went through all this. Dave I will try and find the tsb # so you can check that info out, I was shocked to see it but it was amazing once I removed the gear to hear the...

Re: Non b/s cam in Balanced shaft engine I have been told this would work, when I had the so gt engine apart I saw no way for it to be possible. One thing that I think is different on the 2 blocks is the front bearing lobe is moved inward on the balance shaft because they had to make room for...

Re: Flexible oil dipstick stock truck - ED-5001 correct? I went through the same thing, shave part of the block and the dipstick so it would fit, also cut a lot off the brass part of the dipstick as it ran into the 4 bolt mains :D When I rough measured the dipstick it looked like the level...

Re: FS: Stock Typhoon Air Conditioning Components My dad might want part of this, having a hard time understanding if you possibly have any pieces he needs. He is looking for any of the pieces that go behind the dash, not sure if you just changed the outside pieces or all of them. If you have...