10-11 sec Build Up Needed

Syborg Twin Turbo

Syborg Twin Turbo
Here i is just a Quickie. I have avery long cheat sheet if anyone want it. Send me a e-mail and title it cheat sheet and i'll send you a copy.

btw - i need to go back and read the entire thread as i haven't even done that yet.

Interior
LW Racing Seats
5 Point DOT Legal Racing Harness
8 Point Roll Cage
Plexiglass Rear Window
Various Quages - (mount to Roll Cage not Pillar)

Front Suspension
JS Design Coil Over - (E-Rue)
Ball Joints - (E-Rue)
Poly Bushings - (E-Rue)
Drive Shaft Loop - Phil Cheevers (http://www.syty.net/phpBB2/viewtopic.php?t=33551)
12" Brake Upgrade - (Bear Racing)
AGR Manual Steering Box - (Summit)
Borgenson Steering Shaft - (John Waller)

Rear Suspension
Flex-A-Forms Leaf Springs - Rockford Racecraft
Cal Tracs - Rockford Racecraft
Drive Shaft Loop - Phil Cheevers (http://www.syty.net/phpBB2/viewtopic.php?t=33551)
12" Brake Upgrade - Race Prove Motors
LPE Rear Diff Cover and Support - (Summit Racing)
C-Clip Eliminator - (Your local speed shop)

Trans
Built 700R or 4L60

Fuel Delivery
Fuel Cell - mounted on Bed floor
Aeromotive Fuel Filter -  - Summit Racing
Aeromotive Fuel Pump - Summit Racing
Aeromotive Fuel Pressure Regulator - Summit Racing
Injectors - Size depends on HP and turbo selection

Motor
Frame Pads & Motor Mounts - Rockford Racecraft
Aluminum Oil Pan - Race Proven Motors
Bowtie Block Sportsman - Race Proven Motors
Even Fire Crank - Moldex 3.48 Stroke - Rockford Racecraft
Eagle Rods
TRW Pistons
Cam - See Brian Greens Cam Specs
Lil Brodex Heads - RPM
Aluminum Valve Covers - Race Proven Motors
Extrute Hone Stock Intake and Plenium
BIllet Fuel Rails - JS Design
Hi Temp Coated Exhaust Manifold - Mike Lee (these are the nicest headers out there)

Ignition System
MSD Distributor - Summit Racing
MSD Digital 7
MSD HVII  Super Coail
Evenfire - Fast, Accel DFI or Big Stuff (my personal choice)

Turbo
Talk with any Vendor as there are a bunch of new Turbo's on the market (i personally like the stealth 70)

Intercooler
McCoy Air to Air - McCoy Motorsports
 

Syborg Twin Turbo

Syborg Twin Turbo
KGB Pilot125 said:
take out v6 put in large small block v8 very low compression 2 large turbos and big stuff efi, 700hp or so on 91 pump gas.

pretty easy huh

josh


Josh - you are the man - how's my truck ???

BTW - i went Big Stuff
 

KGB Pilot125

New member
marlborosyclone said:
KGB Pilot125 said:
take out v6 put in large small block v8 very low compression 2 large turbos and big stuff efi, 700hp or so on 91 pump gas.

pretty easy huh

josh


Josh - you are the man - how's my truck ???

BTW - i went Big Stuff

I thought that was the easiest way to explain the best way to go fast, also had something to do with just reading about a prostreet camaro that put down over a 1000 hp on pump gas using a 540 CI with around 7 or 8 to 1 compression and 2 huge turbos and used big stuff 3 to get around 12-16 mpg on the freeway. even ran 7's I think.

The truck is going well its collecting dust and parts waiting for my work schedule to slow down and the new shop to be done. I have been talking to some people about big stuff and also been talking to the guy from fast track performance about his twin turbo v8 build up its very simular to mine. his shake down was 9.xx and he got booted.

how is your build going? well I hope.

Josh
 

Syborg Twin Turbo

Syborg Twin Turbo
I thought that was the easiest way to explain the best way to go fast, also had something to do with just reading about a prostreet camaro that put down over a 1000 hp on pump gas using a 540 CI with around 7 or 8 to 1 compression and 2 huge turbos and used big stuff 3 to get around 12-16 mpg on the freeway. even ran 7's I think.

I am working with a friend that is building a 427 cu in. small block twin turbo set up for a syclone. Should be very interesting to see this beast go down the track.


The truck is going well its collecting dust and parts waiting for my work schedule to slow down and the new shop to be done. I have been talking to some people about big stuff and also been talking to the guy from fast track performance about his twin turbo v8 build up its very simular to mine. his shake down was 9.xx and he got booted.


Big Stuff is the only way to fly - lets see. Stand alone engine harness, Complete Engine management, 4l80e trans controller with harness, torque convertor lock up, boost controller for 2 turbos', data aquisition and so much more i would run out of space typing it here.


how is your build going? well I hope.

Josh



It's going well. I've collected a bunch of parts. I am dropping the frame off at the chassis shop tommorow. They are going to mount the fuel cell, create the tubular trans mount for the 4l80e and rework my upper control arms.

Once i get the chassis back then the cab will go to the chassis shop. They are going to mount the vintage air-heat-defrost, digital 7, HVCII Coil, Harness Bar, Big Stuff 3 Box and make the bracket for the e-brake cable in the center consule.

Lots of stuff - lots of money

After that it back to my shop and re-introduce the cab to the chassis and put the front end on and take it back to the chassis shop for the downpipe, exhaust and intercooler piping.

They also have to rebuild / create a new core support so i can mount the radiator, air conditioning condensor and intercooler.

lots more money

Can't wait it going to finally look like something at about x-mas this year.

Yahoooooooooooo

marty-mj
 

MRKING

New Parts for Old Trucks
how much ??

how much ??

Marty when you wrote "lots more money" , you really mean LOTS MORE MONEY!!! :lol:
 

SEL777

One of 101
I tried to open the exel sheet from the link. I go to chitownsyty and get a search engine for shopping. Where can I find that exel list? I have also experienced a hassel with user's only answer is to do a search. I posted a question re: Cool License Plates for Ty's. Of all that took the time to read the post, I received one response DO A SEARCH! I did and I got 200 posts to go through and after 10 w/o a plate idea I quit. :agrue:
 
Top