Abs Power/ground Plug Question....

mpettograsso

mpettograsso

Doghouse Member
OK.....ripped ABS out and thanks to tucker, made it real east to replace the lines. All i have to do is bleed etc.

I will have the factory ABS stuff for sale next week if anyone is interested.

Here is my question

I also installed an MSD 6AL on a custom aluminum bracket that I fabricated where the ABS module was. I kept the plug intact that POWERED the module (red/blk with black connector) to use for future power. I believe there should be a seperate fuse for this in my fuse box? ...anyway... is there any reason that anyone knows of why I shouldnt use this power and ground for my MSD 6AL?. he wire size is about the same size as the supplied MSD wires, and I figure if it will power that big ABS module, it should do the ignition as well....has anybody else done this?
 
W

werbicki

<User Title Goes Here>
Re: Abs Power/ground Plug Question....

mpettograsso said:
OK.....ripped ABS out and thanks to tucker, made it real east to replace the lines. All i have to do is bleed etc.

I will have the factory ABS stuff for sale next week if anyone is interested.

Here is my question

I also installed an MSD 6AL on a custom aluminum bracket that I fabricated where the ABS module was. I kept the plug intact that POWERED the module (red/blk with black connector) to use for future power. I believe there should be a seperate fuse for this in my fuse box? ...anyway... is there any reason that anyone knows of why I shouldnt use this power and ground for my MSD 6AL?. he wire size is about the same size as the supplied MSD wires, and I figure if it will power that big ABS module, it should do the ignition as well....has anybody else done this?
Click to expand...
I'm about to do the exact same thing. Far as I can tell the Red/Black wires go direct to the battery and aren't switched. I figure if it's the right power lead then it beats running another set of wires to the battery.

Paul
 
W

werbicki

<User Title Goes Here>
Re: Abs Power/ground Plug Question....

mpettograsso said:
sweet....I'm going to try it this weekend, i'll post my results.
Click to expand...
I finished my install this weekend and it works great! I tried to find a connector that would fit the stock one from the ABS module, but I ended up just soldering the connections and tucking it in the wrap. Looks great.

Paul
 
sycoluv

sycoluv

mad scientist
Re: Abs Power/ground Plug Question....

what do you want for the abs setup? i need a new one since mine burned up in the fire
 
W

werbicki

<User Title Goes Here>
Re: Abs Power/ground Plug Question....

sycoluv said:
what do you want for the abs setup? i need a new one since mine burned up in the fire
Click to expand...
I tore mine apart trying to get the stock connector plug out, which didn't work at all. I ended up tossing it in the junk. Maybe mpettograsso can sell you his.

Personally I would just delete it. Instead I'm puttin in Baer 4-wheel disc which is what I think it should have had in the first place!

Paul
 
You must log in or register to reply here.
Top