ACE Racing truck done

[10secTy]

Here are some pics of the ACE racing Syclone that me and Tony have been working on. The truck is done and we are taking it to the dyno on Sat.

More pics are here http://turbov6.turbogm.com/canadiansyty/images/customer builds/Acebuild/

Nolan

 

[Andreas]

Very clean nice work
Post dyno test on sunday :wink:

 

[10secTy]

Well Dyno went with out a hitch. We dynoed the truck on a Mustang dyno that a fellow Syclone owner runs. Truck made 512hp@5400 rpm and 570lbs @4400 this was at 24psi. The tune was set up safe for lots of safe runs. Air fuel ratio started at 10.9@ 3300 and ended at 11.5 at 5500. Timing was 24 degrees with 114. I would have liked to run C16 as it has more power potential but the owners use 114 in there snowmobiles so they have it all ready. We made one run at 28psi but the tires spun bad on the rollers.

On a side note at 19-20 psi with dump closed truck made 430 with dump open it made 471.

Nolan Nykyforuk

 

[MotorMouth]

Wow, that is some stout power, very nice!