Body mount bushing question

oCancerPatiento

oCancerPatiento

Member
I just ordered body mount kit # 3.4132 because it came up when I searched under Syclone. Well it turns out to be a kit for blazer/jimmy. When I contacted Energy Suspension they said it is the correct kit but it will just have extra bushings left over. Should I just return it and order kit # 3.4130 for a 4x4 regular cab Sonoma? I believe someone on here said they had the said problem also. Any info would be appreciated. Thanks.
 
sy2675

sy2675

He Saved the Pimp'n Game!
Re: Body mount bushing question

im pretty sure i had a couple of extras when i did my sy, dont know what part # i got tho, if you got em, just use em, then you can have an extra laying around in case you need them later on.
 
Fast Cars

Fast Cars

New member
Re: Body mount bushing question

I have the 3.4130 kit and the bushings with the steel ring are too big and don´t fit :(
Energy S. says they are the correct one´s for the SY, though?!?
 
oCancerPatiento

oCancerPatiento

Member
Re: Body mount bushing question

I tried to fit mine up and 2 of my holes are to small for the bushings also. Is this a common problem? How has everybody fixed this? Different bushings, grinding the hole bigger?
 
warmpancakes

warmpancakes

New member
Re: Body mount bushing question

what hole? Ive installed 4 sets of these and never a issue, best thing is to bead or sand blasd the old cups clean , Im installing another set right now with zero issues
 
oCancerPatiento

oCancerPatiento

Member
Re: Body mount bushing question

Its the rear cab mounts. They are a different size than the front cab mounts and the core support. The rear measure about 1 5/8" and the others measure about 1 7/8 - 2". All the mounts in the box are the same size and part number. My frame and mount cups have all been sandblasted and repainted so thats not an issue.
 
warmpancakes

warmpancakes

New member
Re: Body mount bushing question

on the syclone I just "clunked" them with a hammer a bit, also make sure the numbers are the same on the energy parts as ive had them make a boo boo
 
Fast Cars

Fast Cars

New member
Re: Body mount bushing question

warmpancakes said:
on the syclone I just "clunked" them with a hammer a bit, also make sure the numbers are the same on the energy parts as ive had them make a boo boo
Click to expand...

No way my bushings would fit, even with the biggest hammer ;)

And I emailed energy suspension...they say I hjave the correct numbers.

:(
 
oCancerPatiento

oCancerPatiento

Member
Re: Body mount bushing question

Yeah mine wont fit by pounding them in either. Im going to try and return my kit and get kit #3.4130 for a 4x4 regular cab Sonoma. Z Ski thinks this is the correct kit for the Syclone. Does any body have a 3.4130 set sitting around that could tell me the part numbers on the bushings themselves?
 
Fast Cars

Fast Cars

New member
Re: Body mount bushing question

oCancerPatiento said:
Yeah mine wont fit by pounding them in either. Im going to try and return my kit and get kit #3.4130 for a 4x4 regular cab Sonoma. Z Ski thinks this is the correct kit for the Syclone. Does any body have a 3.4130 set sitting around that could tell me the part numbers on the bushings themselves?
Click to expand...

If you get the 3.4130 kit and it fit´s, PLEASE post here !
I am very interested to get bushings that fit...
 
warmpancakes

warmpancakes

New member
Re: Body mount bushing question

I have both kits and they come with the same bushings, the syclone cups are tubular while the typhoon are oval shapped
 
You must log in or register to reply here.
Top