dual 255 walbro's

[Lvnspeed]

I found these pictures on the forum

http://gallery.jsmanufacturing.com/main.php?g2_view=core.ShowItem&g2_itemId=5678

My question is I have a racetronix hot wire kit already for one pump can it be used to pwer the second one also or will I need a different kit? I was planning to run a hobs switch to trigger the second pump. Also at what point will a need the second pump?

 

[ziembic]

Re: dual 255 walbro's

Everyone that I have seen has 2 racetronix harnesses.

 

[ViciousV6]

Re: dual 255 walbro's

The best advise is to run 2 seperate relays as if one fails the other one will still be working. I hot wired both my 255 pumps to run all the time, its doesn't really matter if one is on a other is off. I felt more confident to have them on all the time.

Never had problem in 2 years i ran them, i bought mine used too.

ViciousV6
Ralph

 

[Lvnspeed]

Re: dual 255 walbro's

thanks guys. parts pile is getting bigger I am getting excited out this project.

 

[ghettosled]

Re: dual 255 walbro's

racetronix makes a dual pump harness specific for our double pumper kits with hobbs activation and led activation light.. Not to mention it includes the most critical section which is the wiring through the tank lid and to the pumps. Its a bit different then a single pump setup.

Really clean install..

We are getting our new order of harness' in on the 6th.

 

[1BADV6]

Re: dual 255 walbro's

Mike,

What is the cost of the Racetronix dual pump harness?

thanks,

 

[ghettosled]

Re: dual 255 walbro's

$185 for the dual fuel pump wiring harness. (3 piece kit - must specify sy or ty)

 

[1BADV6]

Re: dual 255 walbro's

Thanks Mike, let me know when they arrive and put a Typhoon harness aside for me.

 

[ghettosled]

Re: dual 255 walbro's

10-4.. thanks