Eagle rod installation sheet

[Ty1642]

I'm looking for a copy of the installation instructions for Eagle rods. Does anyone have a copy they could send a photo of?

 

[proptop]

Sir,
Just walked out to the shop and I must have thrown them away or misplaced them somewhere who knows. Can I ask on what information that you are needing? It is torque value or orientation of rods in the motor?
Thanks,
Bob

 

[proptop]

Sir,
Went thru my pics and found one that might be helpful on rod orientation. Also looked at my old notes and the eagle rods I ran in the past were torqued at 75 lbs with ARP lube for a .0006 rod stretch. You will also have to modify a stock pan if you are using Eagle rods in there as the will hit along with the pan rail on the block.
Bob

 

[Ty1642]

Thanks for the reply. I'm looking for the torqueing procedures. Do they call out an angle gauge, or just torqueing to 75 ft-lbs?

 

[proptop]

I believe they call out both procedures. You could call them and they might send you a set of instructions. The rods that I used had the 2000 upgraded bolts.
Bob

 

[Ty1642]

I did reach out to Eagle, but they didn't respond to me.

 

[proptop]

Roger that and maybe someone has a set of rods sitting in a box that might have the instructions.
Bob

 

[wildphil]

This link may help you. http://www.eaglerod.com/mosmodule/bolt_torque.html