getting rid of a lot of good stuff!!!
- Thread starter Dynamo
- Start date
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
yep im in ohio, and the vac kit comes with the instructions, it has everything in it, all i did was open it and put it back because the previous owner had a completley different vac set up and i didn't even wanna go through the headache cause he made up his own little system for it unfortunately, and it didn't work with the vac kit i purchased off of the forums here. here is a link that sy-1177 sent me that shows the wheels,the gt35r turbo,and pistons and rods and etc... that's for sale in the list here. the pics that say "at jeffs" are pics with the wheels after being polished, its from a distance but you can see how shiny they are. the hks ssqv type blow off valve is pictured in here too, it was used on the stock turbo, he cut the pipe with the flange for some reason so the pipe is only as wide as the bov.
Im also selling the Precision GT35R turbo and the 3" PTE downpipe with cutout, not sure on the price for these yet but make some offers, i have a good idea of what they are worth, im not giving them away, MIGHT be interested in some trades, depends on what kinda parts ya got, but as far as price goes i know the both of these are worth over $1k, the turbo is perfect and so is the down pipe and cutout, it's currently on the truck right now for those close enough to wanna see it on the truck in person and see how well it works, i still drive it when its nice outside.
here's the link to the pics of everything, engine parts are still in the boxes from the manf.
http://syty.huryde.com/gallery/JesseA
call for any other questions, im not on here much, it's the best way to reach me
yep im in ohio, and the vac kit comes with the instructions, it has everything in it, all i did was open it and put it back because the previous owner had a completley different vac set up and i didn't even wanna go through the headache cause he made up his own little system for it unfortunately, and it didn't work with the vac kit i purchased off of the forums here. here is a link that sy-1177 sent me that shows the wheels,the gt35r turbo,and pistons and rods and etc... that's for sale in the list here. the pics that say "at jeffs" are pics with the wheels after being polished, its from a distance but you can see how shiny they are. the hks ssqv type blow off valve is pictured in here too, it was used on the stock turbo, he cut the pipe with the flange for some reason so the pipe is only as wide as the bov.
Im also selling the Precision GT35R turbo and the 3" PTE downpipe with cutout, not sure on the price for these yet but make some offers, i have a good idea of what they are worth, im not giving them away, MIGHT be interested in some trades, depends on what kinda parts ya got, but as far as price goes i know the both of these are worth over $1k, the turbo is perfect and so is the down pipe and cutout, it's currently on the truck right now for those close enough to wanna see it on the truck in person and see how well it works, i still drive it when its nice outside.
here's the link to the pics of everything, engine parts are still in the boxes from the manf.
http://syty.huryde.com/gallery/JesseA
call for any other questions, im not on here much, it's the best way to reach me
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
i just got a dig camera today so i can get pics of all of this stuff, gonna go take some pics now, i keep getting pm's asking what the prices are on the parts, i have all of that info listed on the first post including my phone #, be right back, gonna take pics now.....
i just got a dig camera today so i can get pics of all of this stuff, gonna go take some pics now, i keep getting pm's asking what the prices are on the parts, i have all of that info listed on the first post including my phone #, be right back, gonna take pics now.....
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
ok, that's everything, i gotta have surgery in a couple days so i wont be on here much, if you need to reach me, call me on the cell phone 216-256-1583, ive put my number on this thread a few times and ppl are still pming me for my # lol :tup: so, if ya have any questions, feel free to call and i'll answer what ever questions ya have, all of the engine parts are new not used except for the blow off valves. seats are new too, never installed, speakers are not syty speakers, i tried to get different angles of the wheels to show the reflectiveness of them, that's the best i could get, im not really lookin to "hold" any of this stuff, this is more of a first come first serve, Injected1 has dibs on the stock polished wheels until wed (13th) if he doesn't get them by then they will be back up for grabs, as of now, everything else in the pictures is for sale except the truck :tup: all of the weights and dimensions are listed near the beginning of this thread so check it out to get your shipping quotes cause i wont be able to get online after i have this surgery, but feel free to call to set up a date to come by if you wanna make the drive out here or for avalability of items for sale, talk to you guys soon, i'll be out of commision for a few weeks so call me on the cell 216-256-1583, im off to start my LS 6.0 swap, wish me luck!!!!
ok, that's everything, i gotta have surgery in a couple days so i wont be on here much, if you need to reach me, call me on the cell phone 216-256-1583, ive put my number on this thread a few times and ppl are still pming me for my # lol :tup: so, if ya have any questions, feel free to call and i'll answer what ever questions ya have, all of the engine parts are new not used except for the blow off valves. seats are new too, never installed, speakers are not syty speakers, i tried to get different angles of the wheels to show the reflectiveness of them, that's the best i could get, im not really lookin to "hold" any of this stuff, this is more of a first come first serve, Injected1 has dibs on the stock polished wheels until wed (13th) if he doesn't get them by then they will be back up for grabs, as of now, everything else in the pictures is for sale except the truck :tup: all of the weights and dimensions are listed near the beginning of this thread so check it out to get your shipping quotes cause i wont be able to get online after i have this surgery, but feel free to call to set up a date to come by if you wanna make the drive out here or for avalability of items for sale, talk to you guys soon, i'll be out of commision for a few weeks so call me on the cell 216-256-1583, im off to start my LS 6.0 swap, wish me luck!!!!
Goshinki
New member
Re: getting rid of a lot of good stuff!!!
Stealing this BOV
http://i127.photobucket.com/albums/p142/rahmel01/SD530323.jpg
PM me your paypal
100$
Stealing this BOV
http://i127.photobucket.com/albums/p142/rahmel01/SD530323.jpg
PM me your paypal
100$
Sy-1177
Turbo Inside
Re: getting rid of a lot of good stuff!!!
Ok guys, i'm gonna help Dynamo out with the paypal so once you guys agree on the parts to be purchased and price, you can paypal me at:
behrley@hotmail.com
Disclaimer:
I am in no way responsible for the quality, description or shipment of any parts sold, i'm just collecting the money for him. :tup:
Ok guys, i'm gonna help Dynamo out with the paypal so once you guys agree on the parts to be purchased and price, you can paypal me at:
behrley@hotmail.com
Disclaimer:
I am in no way responsible for the quality, description or shipment of any parts sold, i'm just collecting the money for him. :tup:
Richard Le
New member
Re: getting rid of a lot of good stuff!!!
PM sent!
PM sent!
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
All set, RFL BOV will be leaving first thing in the morning. thanks!:tup:
All set, RFL BOV will be leaving first thing in the morning. thanks!:tup:
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
I don't have paypal, Sy-1177 is handling the $ on the transactions, everything is boxed up and ready to go. sorry for the inconvenience.
I don't have paypal, Sy-1177 is handling the $ on the transactions, everything is boxed up and ready to go. sorry for the inconvenience.
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
the PTE downpipe with cutout is for sale also, it's in the pics, and so is the turbo, it's a Precision GT35r turbo, was gonna use it for the LS swap but i don't think it'll give me the power numbers im looking for. make an offer on them if interested, i know what they are worth so i'm not "giving them away" they are both in great condition.:tup:
the PTE downpipe with cutout is for sale also, it's in the pics, and so is the turbo, it's a Precision GT35r turbo, was gonna use it for the LS swap but i don't think it'll give me the power numbers im looking for. make an offer on them if interested, i know what they are worth so i'm not "giving them away" they are both in great condition.:tup:
Dynamo
Member
Re: getting rid of a lot of good stuff!!!
oh, as you can see in the pics, i don't have an ac compressor, the turbo housing came into contact with it, the previous owner had all that stuff done, turbo and dp are great though, i bought this truck a couple years ago and i have put about 10k miles on it since then.you can still run ac if you would like with this with minor mods, i pulling all the ac stuff for weight reduction, and clearance for the ls swap. factory intercooler set up if for sale also, i have the shurflow pump, and two additional aux coolers mounted behind the grill, you can kinda see them in the front pic of my truck on this thread:tup:
oh, as you can see in the pics, i don't have an ac compressor, the turbo housing came into contact with it, the previous owner had all that stuff done, turbo and dp are great though, i bought this truck a couple years ago and i have put about 10k miles on it since then.you can still run ac if you would like with this with minor mods, i pulling all the ac stuff for weight reduction, and clearance for the ls swap. factory intercooler set up if for sale also, i have the shurflow pump, and two additional aux coolers mounted behind the grill, you can kinda see them in the front pic of my truck on this thread:tup:
REVEREND HARMON
Party in a box!
Re: getting rid of a lot of good stuff!!!
Interested in the seats.
Interested in the seats.
Sy-1177
Turbo Inside
Re: getting rid of a lot of good stuff!!!
Dynamo asked me to post about the stock turbo for sale. This came off my Typhoon (mileage unknown) there is little to no shaft play, it may need a good cleaning but I guarantee its a good used stock turbo.
Another point of intrest on it is that the waste gate puck has been removed on it so the stock downpipe will no longer work with this turbo. However, included with the turbo is a JS flange that will accomodate the puck being removed- it will vent the wastegate to the downpipe instead of back into the turbo. I hacked off the 3" downpipe that was on it so there is still a stub if you will on the flange. That will either need to be cut off to start from scratch, or build onto it. Any more questions, feel free to ask.
Dynamo asked me to post about the stock turbo for sale. This came off my Typhoon (mileage unknown) there is little to no shaft play, it may need a good cleaning but I guarantee its a good used stock turbo.
Another point of intrest on it is that the waste gate puck has been removed on it so the stock downpipe will no longer work with this turbo. However, included with the turbo is a JS flange that will accomodate the puck being removed- it will vent the wastegate to the downpipe instead of back into the turbo. I hacked off the 3" downpipe that was on it so there is still a stub if you will on the flange. That will either need to be cut off to start from scratch, or build onto it. Any more questions, feel free to ask.
warmpancakes
New member
Re: getting rid of a lot of good stuff!!!
selling the flange seperate? the JS one
selling the flange seperate? the JS one