Max boost with factory boost solenoid

[Sy 0145]

What's the max boost that is capable with factory boost solenoid. I've hit 26psi. Trying to get to 30psi?

 

[2500avalanche]

What type of motor/build do you have? That kind of PSI = kaboom! Stock PSI is 14 I believe.

 

[Sy 0145]

Stock motor with 111,000 miles on it

 

[neildemo]

You shouldnt be going anything over 21 psi 19si safe "with 80 lb injectors and e85 and upgrade fuel pump" .the stock injectors are maxed out at like 17psi. You WILL grenade your engine if you push a stock motor over 17 without Supporting mods.

 

[DaveP's Ghost]

What do you need "boost control" for? Pull the waste-gate hose off and leave it off. You'll hit 30+psi.

 

[graham1524]

It really depends on the MAP and chip you're running

 

[Sy 0145]

What do you need "boost control" for? Pull the waste-gate hose off and leave it off. You'll hit 30+psi.

Ok. Thanks

 

[Sy 0145]

It really depends on the MAP and chip you're running

Ok. Thanks

 

[Brassmonkey]

Some one I knew, put two nickels (one near each bolt) behind the waster gate mounting bracket and raised the stock boost about 3 psi.

 

[Sy 0145]

Ok. Thanks

 

[Sy 0145]

Eric at turboteeek made me a new chip and eliminated the fuel cut off. Haven't tried it. It's arriving today.