Odyssey PC925T battery

[lavaman]

I got tired of using silicone to patch the cracks on the silly stock plastic intake tube. The last straw was finding a broken end/piece(about the size of a 3" hose clamp) of the tube lodged in the orange turbo intake hose. I was lucky it didn't get lunched by the turbo. Of course I had to buy one of these.....(OOPS, Ginormous...I know)

....just so I could accomodate the air filter

Dunno what to do with a gaping hole on drivers side now..... :roll: .

 

[4C FED]

Re: Odyssey PC925T battery

Dunno what to do with a gaping hole on drivers side now..... :roll: .

That's where the coolant overflow bottle goes when you buy the PAC alky kit.:tup:

 

[lavaman]

Re: Odyssey PC925T battery

...or add a small freezer for hypercooled air/water I/C....

or a small smoker....smoked wild pig!..mmmm

 

[ShuggsRR]

Re: Odyssey PC925T battery

I bought one yesterday... well the PC860. Should have it by Wed.

Did you use the factory battery wires?
How did you stick the elbow over there? My trans line running into my radiator is in the way.

 

[lavaman]

Re: Odyssey PC925T battery

Yes, the stock Bat. wires are used. But you have to remove your original bolt and use their supplied metric bolts(or equivalent) and add afew washers/star washers for good contact. In my original post you can see that the Positive reaches and attaches fine but I had to add less than a foot of #2 AWG weld cable for the ground....prolly temporarily though...might add a little buss for looks :roll:

The black 90* elbow is from my old Kenne Bell cold air kit which goes into the stock orange hose.

The elbow has a nice tight bend so this worked out well for now...I gotta un-jerry rig some things to clean up the appearance though.

 

[ShuggsRR]

Re: Odyssey PC925T battery

Oh I see. Yours goes up and over the lines. And you bypassed the radiator trans cooler when you added you external cooler? I thought it was best to run both coolers. hmmm...

 

[lavaman]

Re: Odyssey PC925T battery

No, I'm still running the Rad. trans cooler in series with external one :tup: