Project Time Attack - Random Images PCV System

HighPerformanceTrucks

HighPerformanceTrucks

Lift & Shift Specialist
main.php


main.php


main.php


main.php


All plumbed except I ran out of 3/8" hose to the intake pipe! I plumbed the fresh air intake 3/8" hose closer to the air filter and the dirty side feed PCV 3/8" hose while under boost closer to the turbo compressor inlet. There is a vacuum port on the Accufab 75mm throttle body that I plumbed in the dirty side feed PVC 3/8" hose while sucking under vacuum. Hope this works.
 
I

i8av8

Donating Member
Re: Project Time Attack - Random Images PCV System

looks great! i really like those black woven nylon hoses. something different compared to the steel braided hoses. been thinking of replacing mine with the black hose.
 
4C FED

4C FED

Absolutum Dominium
Re: Project Time Attack - Random Images PCV System

i8av8 said:
looks great! i really like those black woven nylon hoses. something different compared to the steel braided hoses. been thinking of replacing mine with the black hose.
Click to expand...

They help keep the weight down. It gets expensive when you use the matching hard anodized black fittings. They are more $$ than the typical -an fittings.
 
HighPerformanceTrucks

HighPerformanceTrucks

Lift & Shift Specialist
Re: Project Time Attack - Random Images PCV System

4C FED said:
They help keep the weight down. It gets expensive when you use the matching hard anodized black fittings. They are more $$ than the typical -an fittings.
Click to expand...

Yes too much money like the rest of this money pit, but keeping weight down is important. I have over 20 feet of 12AN line for the oiling system alone!
 
I

i8av8

Donating Member
Re: Project Time Attack - Random Images PCV System

that's good to know :tup:

also, i just noticed the black bov. another cool looking accessory. i have the polished alum. one. same style.
 
0966Sy

0966Sy

Code what?
Re: Project Time Attack - Random Images PCV System

Adam, very nice setup. I was wondering on the passenger side tank where it T's into the can from the TB and Turbo compressor side. Are those fittings coming out of the blue Y block check valves of some type?
 
0966Sy

0966Sy

Code what?
Re: Project Time Attack - Random Images PCV System

I can not find those plastic npt/hose end pcv valves anywhere, Ive searched all over the internet. Can you point me in the right direction Adam?
 
You must log in or register to reply here.
Top