Rear QA1 shock part #?

[epix]

Looking to replace my KYB Monomax shocks with the QA1 adjustable shock, anyone have a part #?

 

[poncho]

Re: Rear QA1 shock part #?

look at ridetech.com they have a great pair of shock non adjustable and adjustable . a monotuble shock i have them on my hhr ss and they work great

 

[SY2932]

Re: Rear QA1 shock part #?

I don't *think* that you can get what you need with just a part number, they have the be "built". I bought mine via E-RUE during the myclone fund drive. They have t-bar adapters and custom machined lower bushings for our application... RPM has them if you want to plug-n-play.

 

[BowTy]

Re: Rear QA1 shock part #?

Slick, always the goods at RPM! Do you know off hand if there are any issues if your truck is dropped some, a lot, or stock? I know it makes a difference for most shocks.

 

[Treymen]

Re: Rear QA1 shock part #?

Are the QA1's height adjustable or just the stiffness?
If not height adj, what is a good rear shock that is?.....Thanks

 

[BoostedSUV]

Re: Rear QA1 shock part #?

I have the adjustable QA1 shocks in my very low El Camino and it rides absolutely awesome. If they weren't so pricey I'd have a set on my typhoon without question.

 

[Treymen]

Re: Rear QA1 shock part #?

Are the QA1's height adjustable or just the stiffness?
If not height adj, what is a good rear shock that is?.....Thanks

Bump for this question

 

[BoostedSUV]

Re: Rear QA1 shock part #?

Bump for this question

QA1 shocks have the ability to adjust rebound and recoil (stifness up and down). To adjust height you would need air shocks or coilovers. Those options will only increase ride height.

 

[Treymen]

Re: Rear QA1 shock part #?

QA1 shocks have the ability to adjust rebound and recoil (stifness up and down). To adjust height you would need air shocks or coilovers. Those options will only increase ride height.

Ok. I have the 3" Belltechs now and Nitro drops in the back. But the shocks are beyond done. Which QA1's would keep the rearend low?

 

[BoostedSUV]

Re: Rear QA1 shock part #?

Ok. I have the 3" Belltechs now and Nitro drops in the back. But the shocks are beyond done. Which QA1's would keep the rearend low?

shocks wont control ride height. QA1's you can adjust the ride quality but not the ride height unless you go with the coilover qa1's