transfer case adaptor

[sytydvr]

Is this the adapter that we can use to convert to 80e .

#10B. This is a 3/4 inch spacer needed on some late model Borg Warner all-wheel-drive transfer cases to make the #10A adapter fit (Will require some slight fitting on 2007 6L Hummer H2 for sure). Cost $79.00
http://www.transmissioncenter.net/4L80E.htm

 

[mattw]

Re: transfer case adaptor

Thats a pretty cool adapter that they came up with. I don't think it would work for us though as our adapters are 8 degrees different than a 4x4 adapter. I'm betting this would put your transfer case right into the floor board.


-Matt

 

[George Blake]

Re: transfer case adaptor

Why would you do that?
I make the whole kit.
If you read the PATC deal, it makes it so that you can bolt the other adaptor above it to it. It's over $500. Mine uses just a 5/8" thick steel plate that bolts your STOCK adaptor to the trans so it's clocked correctly.
Just email or pm me or look in the Prime Gears forum and the whole deal is laid out there.
Here:
http://www.syty.net/forums/showthread.php?t=38766

 

[sytydvr]

Re: transfer case adaptor

u r one hard guy to get a hold of!!! any one else here makes these 4l80e conversions??? i need one set or can i get this adaptor and make my own kit from summit racing or jegs? no hard feeling Blake I gave you my c.c over a month ago and you never got back to me.

 

[hrodgmc]

Re: transfer case adaptor

Go with Georges. PATC doesn't know what these things do to trannies...... or Transfer cases.

 

[sytydvr]

Re: transfer case adaptor

i wish i could he doesnt get back to me tried everything to contact him

 

[George Blake]

Re: transfer case adaptor

i wish i could he doesn't get back to me tried everything to contact him

Hey Jose, didn't know that was you. I had some family (my son was hospitalized, among other things) issues and have been playing catch up ever since.
I charged nothing on the card you gave me. With everything that happened, I didn't want to take your money and then not get back to you like you needed.
Just email me if you don't get me on the phone.
cblake3@cinci.rr.com
You've never used that.
If I stayed on the phone all day with every call, I'd never deliver anything.
Email me with everything you currently need and I'll put you a quote together and get yours done. Sorry about that.

 

[George Blake]

Re: transfer case adaptor

u r one hard guy to get a hold of!!! any one else here makes these 4l80e conversions??? i need one set or can i get this adaptor and make my own kit from summit racing or jegs? no hard feeling Blake I gave you my c.c over a month ago and you never got back to me.

Literally every single piece is custom.
You got a PM!

 

[sytydvr]

Re: transfer case adaptor

Thank you Blake!!! im glad u r ok thought you were gone like u were a few years back.

 

[George Blake]

Re: transfer case adaptor

Sent you a pm,email, and phone message. I'll get ya this time.