Ttty
- Thread starter CJSYCLONE
- Start date
93 TY 2185
Donating Member
Re: Ttty
I hope I can see that truck someday.
Good luck with the project.
SweetCJSYCLONE said:
Good luck with the project.
PPI Typhoon
DIY Madman
Re: Ttty
Wow, great job!
Have some questions if you don't mind. I'm doing this soon as well. Was wondering about the TT setup.
- Did you have any problems with the driver's side DP? Have any pics of the routing?
- Looks like you dumped the A/C, is that so?
- What oilpan did you use?
- What motor mounts did you use??
- What A/R compressor housings?
I want to thank you ahead of time. My goals of this project have been pushed forward due to my fiance's car being stolen, so now I have to get the truck running sooner than expected. I was wondering about the twin setup and whether or not it's a possibility with the AWD.
CJSYCLONE said:
Wow, great job!
Have some questions if you don't mind. I'm doing this soon as well. Was wondering about the TT setup.
- Did you have any problems with the driver's side DP? Have any pics of the routing?
- Looks like you dumped the A/C, is that so?
- What oilpan did you use?
- What motor mounts did you use??
- What A/R compressor housings?
I want to thank you ahead of time. My goals of this project have been pushed forward due to my fiance's car being stolen, so now I have to get the truck running sooner than expected. I was wondering about the twin setup and whether or not it's a possibility with the AWD.
CJSYCLONE
New member
Re: Ttty
Hey Dan,
********* The driver's side is 3" and tapers down to 2.5" as it goes in towards the frame the kicks out.*********
********* Yes I did remove the factory air but have plans to install the vintage air. There is room for a compressor between the turbo and head on the passenger side. **********
********* I purchased the oil pan from a syty member a long time ago before any parts were available. The conversion parts are available now from http://www.turbotime.us/.*********
******** They are solid mounts. The frame was the syty solids from turbotime and the motor was purchased off e-bay. They were too wide and had to be narrowed by cutting one tab off and re-welding it closer.*******
******** T04B's, A/R .60 on comp and A/R .69 on turbine housing. Still have to see how it will spool when running but the turbine size should be close. *******
I'll take some pictures sonn for ya.
Chris
Hey Dan,
********* The driver's side is 3" and tapers down to 2.5" as it goes in towards the frame the kicks out.*********
********* Yes I did remove the factory air but have plans to install the vintage air. There is room for a compressor between the turbo and head on the passenger side. **********
********* I purchased the oil pan from a syty member a long time ago before any parts were available. The conversion parts are available now from http://www.turbotime.us/.*********
******** They are solid mounts. The frame was the syty solids from turbotime and the motor was purchased off e-bay. They were too wide and had to be narrowed by cutting one tab off and re-welding it closer.*******
******** T04B's, A/R .60 on comp and A/R .69 on turbine housing. Still have to see how it will spool when running but the turbine size should be close. *******
I'll take some pictures sonn for ya.
Chris
CJSYCLONE
New member
Re: Ttty
Dan,
Here is a link for more pics including engine mounts and downpipe routing.
http://www.turbols6.com/gallery/view_album.php?set_albumName=cjttyphoon
Chris
Dan,
Here is a link for more pics including engine mounts and downpipe routing.
http://www.turbols6.com/gallery/view_album.php?set_albumName=cjttyphoon
Chris
live1053rulz
Nor Cal SyTy
Re: Ttty
Wow, so sweet. I wanna see this thing someday.
Wow, so sweet. I wanna see this thing someday.
