Turbo Lines
- Thread starter willyson
- Start date
Captain Morgan
Moderated User
Re: Turbo Lines
well Letter C isnt missing anything. You can see parts of the original foam filter thingy that was originally on there.
You will also see the vac. line thats next to the orange elbow in your pictures, that line hooks to I believe Letter A, but im not 100% sure on that.
As for Letter B, hooks into the actuator (the gold thingy with the arm on it) that should be on the bottom side of the turbo.
Also the other problem I noticed is you have no wires going to it. You see the part that has the DeloRemy name on it, well thats a plug for the wiring harness, so hopefully that wasnt cut off.
Just out of curiousity, is there an aftermarket boost controller installed somewhere on the truck? that would explain why that is disabled and not in use anymore.
well Letter C isnt missing anything. You can see parts of the original foam filter thingy that was originally on there.
You will also see the vac. line thats next to the orange elbow in your pictures, that line hooks to I believe Letter A, but im not 100% sure on that.
As for Letter B, hooks into the actuator (the gold thingy with the arm on it) that should be on the bottom side of the turbo.
Also the other problem I noticed is you have no wires going to it. You see the part that has the DeloRemy name on it, well thats a plug for the wiring harness, so hopefully that wasnt cut off.
Just out of curiousity, is there an aftermarket boost controller installed somewhere on the truck? that would explain why that is disabled and not in use anymore.
Re: Turbo Lines
HEY!!!!! that's the boost solenoid that I need for this weekend.
You can get a complete replacement set up from LMC Truck. I just looked it but they wanted $65 to ship it overnight to me. Usually shipping is free so check it out. There are also alternative setups if you don't care about OEM.
HEY!!!!! that's the boost solenoid that I need for this weekend.
You can get a complete replacement set up from LMC Truck. I just looked it but they wanted $65 to ship it overnight to me. Usually shipping is free so check it out. There are also alternative setups if you don't care about OEM.
typhoonmaster
New member
Re: Turbo Lines
what is OEM????
what is OEM????
Captain Morgan
Moderated User
Re: Turbo Lines
Original Equipment Manufacture
Original Equipment Manufacture
willyson
trollin'
Re: Turbo Lines
to my knowledge no aftermarket boost controller has been on the truck. It is a possibility though. the boost gauge is still functioning, although the oil pressure gauge is not working(this might be something else). what kind of effects should these lines have on the cars performance once they are re-installed?
Thanks for the help,
Mark
to my knowledge no aftermarket boost controller has been on the truck. It is a possibility though. the boost gauge is still functioning, although the oil pressure gauge is not working(this might be something else). what kind of effects should these lines have on the cars performance once they are re-installed?
Thanks for the help,
Mark
dirtdemon
"mr. ghettowrench"
Re: Turbo Lines
helps ECM controlling boost
w/o using the solenoid ur turbo will produce only 8psi of boost (i think 8psi is correct) , anyway w/o the solenoid activated you ll never get a clue on what big fun this trucks are
*hehe*
:checkit:
http://www.syty.org/old/pics/diagrams/turbo-small.gif
btw. dont forget to click the connector in !
hope it helps,
pat.
helps ECM controlling boost
w/o using the solenoid ur turbo will produce only 8psi of boost (i think 8psi is correct) , anyway w/o the solenoid activated you ll never get a clue on what big fun this trucks are
*hehe*
:checkit:
http://www.syty.org/old/pics/diagrams/turbo-small.gif
btw. dont forget to click the connector in !
hope it helps,
pat.
wantingasy
Active member
Re: Turbo Lines
Here's a picture of the boost solenoid connector...I had the same problem with mine, except mine just wasn't plugged in and I didn't know what that connector went to :tup:
Notice: The wire loom that is for the connector should be ziptied or somehow fastened onto the hard line for the A/C. There will be two wires inside of the loom, one's black and the other is orange.
Here's a picture of the boost solenoid connector...I had the same problem with mine, except mine just wasn't plugged in and I didn't know what that connector went to :tup:
Notice: The wire loom that is for the connector should be ziptied or somehow fastened onto the hard line for the A/C. There will be two wires inside of the loom, one's black and the other is orange.
Re: Turbo Lines
dont know if you guys know, but we now offer 2 ply nylon reinforced vacume lines. we keep both the common sizes on hand for syty applications. you wont have to worrie about anymore heat baked/cracked vacume lines. this stuff is tough.
bottom 2 items on this page
http://www.turbotime.us/CategoryProductList.jsp?cat=Syclone+/+Typhoon:Engine:Turbo&offset=40
e
dont know if you guys know, but we now offer 2 ply nylon reinforced vacume lines. we keep both the common sizes on hand for syty applications. you wont have to worrie about anymore heat baked/cracked vacume lines. this stuff is tough.
bottom 2 items on this page
http://www.turbotime.us/CategoryProductList.jsp?cat=Syclone+/+Typhoon:Engine:Turbo&offset=40
e
wantingasy
Active member
Re: Turbo Lines
"oil ruturn"...lol.... are the lines for the stock turbo replacing those stock black ones going from the block to the oil filter adapter plate?
"oil ruturn"...lol.... are the lines for the stock turbo replacing those stock black ones going from the block to the oil filter adapter plate?
bdydrpds10
Yes I drive a Typhoon.
Re: Turbo Lines
Go to
http://www.sytyauthority.net/
click on TIPS
then click on Wastegate
Their will be a good picture and a short write up about it.
It helped me out a lot when my hoses were off.
Go to
http://www.sytyauthority.net/
click on TIPS
then click on Wastegate
Their will be a good picture and a short write up about it.
It helped me out a lot when my hoses were off.
wantingasy
Active member
Re: Turbo Lines
Oh, Sorry. Should have clarified my reponse. I was referring to the oil lines E RUE was talking about.E-RUE said:
Re: Turbo Lines
i was talkinga bout vacume lines.....
if your interested in oil lines check these out.
http://www.turbotime.us/CategoryProductList.jsp?cat=Syclone+/+Typhoon:Engine&offset=150
e
i was talkinga bout vacume lines.....
if your interested in oil lines check these out.
http://www.turbotime.us/CategoryProductList.jsp?cat=Syclone+/+Typhoon:Engine&offset=150
e