will it be safe

[#4ty]

I think I have asked this ? before but I left for a week and couldnt find it when I got back. I bought a boost control, a 255 fuel pump, a pittbull street chip, and a fpr.
I would like to be able to raise my boost safley, im hope thats every thing I need if not please let me know what else I do need.

 

[Syclonewillie]

I think you should get some type of fuel pressure gauge to tell what the fuel pressure is. I am not sure if you really need it or not just to be on the safe side though.

 

[SeattleSy#1255]

ever thought about going with 3 bar and Ultimate?

 

[#4ty]

are they pretty much the best way to raise boost safley, also im assuming all the parts I already have will only benifit with the chip, right?

 

[Tooky]

Yes and Yes although the 3-Bar Ultimate chip does it's own boost control so you will no longer need a manual boost controller since it sounds like that's what you purchased.

 

[TYPHOOL7]

go with the ultimate or you will end up with a rabbid truck. (personal experience)
i forgot to mention with the pitbull i ran a 13.2 @98 on 112 leaded, a cat and the waste gate actuator unplugged also to mention i boosted 22-23 lbs and subsequently blew a rod. o well!

<font size=-1>[ This Message was edited by: TYPHOOL7 on 2002-04-08 21:14 ]</font>

 

[nick041881]

On 2002-04-08 21:08, TYPHOOL7 wrote:
go with the ultimate or you will end up with a rabbid truck. (personal experience)
i forgot to mention with the pitbull i ran a 13.2 @98 on 112 leaded, a cat and the waste gate actuator unplugged also to mention i boosted 22-23 lbs and subsequently blew a rod. o well!

<~~~ i hope you are telling him that the pittbull cant raise boost by this statement. you say that you had a pitbull chip in your truck which is a 2bar chip. then you say that you boosted 22-23 psi on that same chip. Well, while you were at 23 psi...your ecu thought you were at 14.7 psi...and didnt fuel according to those extra 7 or 8 psi. that is most likely why your truck through a rod.
GET THE ULTIMATE!! oyu will not be sorry.
peace,
nick

<font size=-1>[ This Message was edited by: TYPHOOL7 on 2002-04-08 21:14 ]</font>